Advanced Diagnostic Tool ADTa-100 The ADTa-100 (A-6525-0100) is a set-up tool and diagnostic accessory specifically designed to be used with Renishaw absolute encoder products. It also allows for writing a new zero position.* It can be used in a stand-alone mode or in conjunction with a PC‡ running the ADT View software. *Write zero command is available only for BiSS C, Yaskawa and ‡ Panasonic protocols. Supported Windows® operating systems (x86 or x64): 7 SP1, 8.1, 10. Encoder input pins 0V Serial communications Shield (case) M6 accessory mounting thread - maximum permissible screw protrusion into body 10 mm Encoder status LEDs (x7) 90

RENISHAW. apply innovation™ Renishaw pic New Mills, Wotton-under-Edge, Gloucestershire GL12 8JR United Kingdom Typical power consumption Ripple Typically < 340 mA (ADTa-100 and readhead) Power from a 5 Vdc supply complying with the requirements for SELV of standard IEC 60950-1 or via PC's USB port < 1.25 W 200 mVpp maximum @ frequency up to 500 kHz Storage -20 °C to +70 °C Operating 0 °C to +55 °C 95% relative humidity (non-condensing) to IEC 60068-2-78 IP20 Operating 500 m/s2, 11 ms, % sine, 3 axes Operating 40 m/s2 max @ 55 Hz to 2000 Hz 155 g IEC 61326-1 For available adapter cables with alternative...