Remote I/O Tool Box µPD78F806x Series The Remote I/O Tool Box is a modular development platform designed for fast remote I/Os module implementation and IO-Link integration into fieldbuses. All the technology blocks and pre-certified components to build up a high quality remote IO system are provided. The hardware is based on a selection of Renesas Electronics controllers. The host CPU system is a 32-bit RX63N controller incorporating an Ethernet MAC. Industrial fieldbuses such as PROFINET RT and Ethernet IP are easily implemented on the RX63N host controller. The low resources requirement of the TMG TE stacks imply no external memory (RAM or ROM) is used in this solution. The µPD60611 Industrial Ethernet PHY supporting MII or RMII interface configuration, assures the IEEE802.3 fieldbus connection via a RJ45 connector. In addition the PHY has hardware support for PTP as defined in IEEE1588 V2. The IO-Link subsystem is implemented on the world first integrated dual IO-Link Master controller in the industry. The µPD78F806x’ scalability grants the designer complete control over the number IO-Link ports his application is made of. Port number can be increased or decreased just by stacking or un-stacking IO-Link master modules to the Host controller system. The system allows the implementation of scalable solutions up to 16 IO-Link ports. The IO-Link Master module runs a Smart IO-Link master stack firmware integrating a SPI host driver with high efficiency protocol support as well as features according to IO-Link specification V1.1, including parameter server, EMC functionality, and more. The Remote I/O Tool Box can be used with other starter kits from Renesas Electronics. Applications ●● Modular Remote I/O • IO-Link Gateway Application Example Fieldbus Connection IO-Link Subsystem PROFINET Ethernet IP Stack IO-Link Master Stack Host Side Driver IO-Link Gateway Driver Software Hardware High performance “Sum Telegram SPI” Scalable up to 16 channels 2ch IO-Link ASSP

Remote I/O Tool Box µPD78F806x Series Key Benefits ●● Scalable 32bit Uplink host controller ●● Mapping from IO-Link to Industrial Ethernet ●● Extended Industrial Ethernet PHY family ●● Fieldbus independent com. to Engineering.tool ●● Single-chip IO-Link Master solution ●● Advanced SPI sum protocol for scalability ●● Pre-certified Hardware/Software components Key Features ●● Fieldbus connection: µPD60611 »» ROM/RAM/ E2Data Flash Capacities »» Fully standard compliant with IEEE 802.3/802.3u for 100BASE-TX, 100BASE-FX and 10BASE-T -- 2 Mbytes/128 Kbytes/32 Kbytes »» Communications interfaces »»...