UTC+URC
1 /2Pages

UTC+URC

UTC+URC
1 /2Pages

Catalog excerpts

UTC+URC-1

REMdevice Next Generation Control Technical sheet Command Transfer: UTC +URC The UTC (Commands Transmission Unit) and the URC (Command Reception Unit) modules can be used for the radio transfer of the ON-OFF commands and are capable of up to 20 simultaneous and individual commands. LED indicators give an instant reading of the functioning of the radio remote control. There are two frequency bands available: 434 MHz and 870 MHz. Technical characteristics Transmitter unit Frequency: 433 MHz / 59 channels 870 MHz / 11 channels Commands: on/off Hamming Code > 4 Max n° of simultaneous on/off commands: 20 + start + stop Command response time: 45 ms Start/Active emergency response time: 45 ms Passive emergency response time: 1 s Performance Level of safety function according to Stop protection: Category 3 PL d Protection against unintended movements from the standstill position: Category 2 PL c Range of control: approx. 100 mt (-330ft) Working and storage temperature: -20°C to +70°C (-4°F to +158°F) • Modulation: GFSK • Radio frequency output power: from 1 to 10 mW • Oscillator: digital synthesizing PLL • Antenna: external • Modulbox casing for mounting on DIN EN 50022 Receiver unit • Radio frequency Receiver: Single Chip • Antenna: external • Power of command relay contacts: 4A (DC1/AC1)* / 115V • Power of relay contacts: 4A (DC1/AC1)* / 115V • connecting a diode in parallel with the load, the same current is allowed for category Dc13 (inductive load). To comply with category AC15 is recommended to place in parallel connection with the load an appropriate overvoltage damping RC circuit. (Ref. IEC/EN60947) • Modulbox casing for mounting on DIN EN 50022

 Open the catalog to page 1
UTC+URC-2

Next Generation Control Monitor tester Self-powered display instrument to connect to the receiver, capable of acquiring the operating data of the radio control. • Working frequency and operating channel • Signal and interference level • Number of starts and working hours • Number of Up and Down commands • Relay operating diagnostics • Active controls Reference rules Reference standards Reference directives Radio Equipment Directive (RED) 2014/53/EU Machinery Directive 2006/42/CE (as applicable) Russia EAC-GOST Certificate Radio ETSI EN 300 220-1 V3.1.1 Final Draft ETSI EN 300 220-2 V3.1.1 Final...

 Open the catalog to page 2

All REMdevice catalogs and technical brochures

  1. PAIL EPS

    2  Pages

  2. Genesis

    2  Pages

  3. Company profile

    20  Pages

  4. Pail

    2  Pages

  5. Brick

    2  Pages

  6. T Series

    2  Pages

  7. DCS10

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.