REMdevice PAIL Technical sheet Reliability in all condition First on the market with induction wireless charging, the console is easy to manoeuvre and precise, isolated from dust and humidity, very easily configurable, to meet the requirements of all applications. Technical features Transmitter unit • Dual Band frequency: 433 MHz / 60 channels and 870 MHz / 12 channels • Frequency: 418 MHz / 11 channels China • Commands: on/off, potentiometric control, BCD Code, RS 422/485 • • • • • • • • Hamming code distance > 4 Command response time: 45 ms Active emergency stop command response time: 45 ms Command passive emergency response time: 1 s The stop command is rated PL d cat. 3 and SIL 2 The joysticks (UMFS) are rated PL d cat. 3 and SIL 2 Range: about 100 m Operating and storage temperature: -20°C / +70°C Modulation: GFSK Manchester Radiofrequency emitting power: from 1 to 10 mW Oscillator: PLL digital synthesizer Antenna: built in Power Supply: 3.6 Vdc Current demand: max. 45 mA Accumulators: built in 3X1.2V 1800 mA Up to 40 hours’ autonomy (20°C) Battery low warning time: 30 minutes Waterproof Casing for Outdoor use: Protection Grade IP65 Material: Nylon PA6 FG

PAIL - Technical sheet REMdeviceNext Generation ControlReceiver units • Radiofrequency receiver: Single Chip • Antenna: Multiband internal UHF. Antenna external optional • Command relay contact capacity: 4A (DC1/AC1) / 115V • Stop relay contact capacity: 4A (DC1/AC1) / 115V • No. of on/off contacts: < 22 + START + STOP + CLAX + LAMP • No. of proportional contacts: 1 BCD (optional module) Optional only CL RUBYBOX: AC 230V ±10% 50-60 Hz • Waterproof Casing for Outdoor use: Nylon PA6 FG, Protection Grade IP65 • Dimensions RXDIN-CL and CL RUBYBOX: 166X279X91 mm (LxHxD) • Dimensions RXDIN: 158x75x90...