UNIBAND® Mass measurement on the belt conveyor
2Pages

PRODUCT INFORMATION UNIBAND® Mass measurement on the belt conveyor GBPI-UNIBAND-18644/0 | © REMBE® Kersting | All rights reserved | Valid from 14.05.2018 | Subject to technical changes without notice EXACT DETECTION OF CONVEYED RATES The UNIBAND® is a stainless steel conveyor belt scale for the weighing of continuous material flows. With its simple integration into a conveyor system the throughput and usage measurements may be commercially effected for the desired bulk materials. Because of the low construction height of UNIBAND® it can be integrated into any conveyor system for mass measurement. The UNIBAND® optimises processes with accurate measurements in many different kinds of industrial sectors: stone, earth, food, chemicals and much more. In combination with the ADAM HighEnd transmitter Your Benefits • Simple integration into existing belt constructions due to low construction height. Dimensions can be adapted individually. The weight of the material upon the conveyor belt acts on the measuring roll station, to which the weighing framework is connected. An overload-protected loadcell transforms the weight signal into a voltage signal. Using an optional speed measurement wheel, which continuously runs on the lower belt, the current belt speed is registered. A downstream transmitter processes the weight signal in relation to the belt speed. The conveyor’s performance is displayed in “t/h” and the selected meter reading, for example daily amount in “t” (tonnes). • For implementation in rough process environments completely made of stainless steel. • Readjustments can be performed by customer. • Maintenance-free – no wear as no pivot bearings are included. • Extremely robust and corrosion-resistant; with assembled, fully enclosed, laser welded loadcell. • For implementation in potentially explosive areas. You can find detailed information and contacts for the UNIBAND® on: www.rembe-kersting.com or contact us at: +49 2961 7405-300, in

PRODUCT INFORMATION (temtlg) REM BE’ Kersting GmbH Technical data Material (standard version) | Weighing frame Accuracy Working temperature Output signal Supply voltage Stainless steel 1.4301 ± 0,5 up to 2 % -40 °C up to +75 °C, optional high-temperature version up to 200 °C 2 mV /V 5 up to 12 VDC Designs with customer-specific dimensions upon request. Technical data of integrated loadcell Material Working temperature Housing protective type Supply Output Linearity Hysteresis Reproducibility Overload Approval Stainless steel 1.4301 -40 °C up to +75 °C operating range; -18 °C up to +65 °C...