CONTAINMENT SAMPLER Sampling of toxic media
2Pages

PRODUCT INFORMATION CONTAINMENT SAMPLER Sampling of toxic media GBPI-Cont.PN-17678/1 | © REMBE® Kersting | All rights reserved | Valid from 14.05.2018 | Subject to technical changes without notice OEB4. APPROVED. CERTIFIED. SAFE. Sampling in the containment area presents users with major challenges. On the one hand the system always must remain closed due to the toxic media it contains, on the other hand, it has to be opened for sampling. With its automated in-line sampling system, REMBE® Kersting offers maximum safety and ease, in order to increase efficiency in process management. Operation With the containment sampler sampling occurs using the SmartGlide p* cup sampler. Sampling is transported through the sampling system. The point of withdrawal as well as the sample collection point are separated from the continuing process with pneumatic pinch valves. Their tightness has been tested according to DIN 12266-1 P12 leak rate A inclusive protocol. Because of the pressure in the testing intermediate chamber this pressure is monitored by a pressure transmitter – approved according to ATEX product line 2014/34/EU. The filter system for the pressure equalisation of the sample chamber is according to filter class H13. In addition the containment sampler includes a compressed air storage with a safety circuit, in order to keep the pneumatic actuated pinch valves closed in case of a pressure drop. At the end of the sampling process the samples are captured in a collection hose with a length of 20m and packaged for secure transportation. * Details on SmartGlide p on p. 02 Certified according to PED and TA-Lu . EXTREMELY HAZARDOUS VERY HIGHLY HAZARDOUS HIGHLY HAZARDOUS HAZARDOUS MODERATELY HAZARDOUS Occupational Exposure Band Occupational Exposure Limit Acceptional Daily Exposure Your Benefits • No release of toxic substances. • Maximum product protection. • Guaranteed leak-tightness in the process. • Sample size determined by cup size. • Precise process management. You can find detailed information and contacts for the Containment Sampler on: www.rembe-kersting.com or contact us at: +49 2961 7405-3

(temtlg) REM BE’ Kersting GmbH Technical data PRODUCT INFORMATION SmartGlide p [Cup Sampler] Application and operation The SmartGlide is used to sample free-falling media inside drop tubes and drop shafts. To remove the medium the sample cup moves into the process and captures a defined amount of the medium - up to 250 ml* depending on the SmartGlide type. After retraction, the cup is tilted and the removed sample is dispensed into a preselected sample container such as the sample collection system LayFlat. * Type SmartGlide maxi Consulting. Engineering. Products. Service. REMBE® Kersting...