PRODUCT INFORMATION PRE-TORQUE MULTIFLANGE RUPTURE DISC HOLDER GBPI-IG-KUB-PTU-16320/2| © REMBE® | All rights reserved | Valid from 16.01.2019 | Subject to technical change without notice for reverse acting rupture discs KUB® and IKB® The unique design of the IG-KUB®-PTU rupture disc holder always guarantees the proper insertion, and enables the pre-assembly of the rupture disc. This avoids a damaging of the rupture disc, which can then be reused after dismantling, for example, within the scope of an inspection. The IG-KUB®-PTU rupture disc holder is a flat-seat holder for reverse acting rupture discs. The sealing edge of the seat surface ensures a leak-free sealing through a fully-metallic clamping. The inside diameter of the rupture disc holder outlet performs a support function and guarantees the optimal opening behaviour when the defined burst pressure is reached. The integrated pre-assembly bolts allow an easy and safe installation of the rupture disc. The holder can be used for a wide range of flanges and various pressure classes. Your advantages •P re-assembly of the rupture disc for a rugged and secure handling with a defined torque. •M ulti-flange design, suitable for different pressure classes and flange systems. •H igh degree of leak-tightness through a full-metal sealing. •A vailable in a broad variety of mater

PRODUCT INFORMATION REMBE® provides numerous designs and versions of holders.The table shows an extract of typical versions and corresponding designations. Further customized versions tailored to application are available. <u * Other combinations of F= tongue, N= groove, V= male, R= female and RJ=Ring Type Joint Face are possible. Technical data NPS DN Pressure class ANSI DPressure class PN Pressure class JIS B H D REMBE® GmbH Safety + Control Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714