Q-ROHR® G Flameless venting for gas applications The Q-Rohr® G enables economical flameless venting without any cost-intensive conversion measures like the creation of wall openings. GBPI-QR3-G-16222/1 | © REMBE | All rights reserved | Valid from 10.10.2023 | Subject to technical change without notice Reliable protection against gas explosions Are you looking for an economical solution to relieve gas explosions without emissions and without complex additional installations such as catch baskets? That is exactly what the Q-Rohr® G can offer you. With a quick installation and its minimal dimensions, it can adequately protect systems, peripherals and the environment from the effects of a gas explosion. Production can be quickly resumed again after an explosion event: Simply replace the explosion vent. However, the Q-Rohr® itself only needs to be refurbished after three explosions. Mechanism The flame gases, which can reach a temperature of up to 1,500°C, are cooled down extremely efficiently in the special stainless steel mesh filter inlet developed by REMBE®. This reduces the discharged gas volumes, thus extinguishing the explosion. Your advantages ✓ Rapid restart of operations. ✓ REMBE® stainless steel filter ensures a high level of noise reduction during normal operation and in the event of an explosion. ✓ Eliminates the need for complex vent ducts and wall openings. ✓ 100% leak-tightness, to eliminate danger of asphyxiation. ✓ 100% venting efficiency. ✓ Individually definable opening pressure. ✓ 100 % stainless steel for corrosion resistance. ✓ Connection flange in accordance with EN 1092-1 standard and DIN 86044. ✓ No separate safety zones required in outdoor areas. ✓ No maintenance required, visual inspection by a technician is sufficient. Technical data* Burst pressure Pstat Max. red. explosion pressure Pred Operating temperature *Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions. Visit rembe.de for detailed information and your personal contact. REMBE GmbH Safety+Control ® Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 [email protected] Flameless venting Certified in accordance with EN 14797 Application in accordance with EN 14994 Developed in accordance with EN 16009 ATEX EU-type examination certificate no. IBExU 16 ATEX 2029 X REMBE® Sustainability: Not only do we provide professional safety for your plant and machinery and protect human life, but our products also avoid harmful emissions sustainably eliminate leaks and/or reduce noise pollution. You can find more information on susta

Explosion-proof housing structure with riveted retention rails, wich remains stable even during extremely dynamic explosions Reusable stainless steel filter with integrated pressure wave absorber Pre-wired junction box with transformer isolated barrier (intrinsically safe) Integrated REMBE® explosion vent incl. signalling unit and pre-installed gasket Q-Rohr® G components. Flame trap Tag plate Junction box Lifting lugs, bottom Flange Explosion vent with signalling unit GBPI-QR3-G-16222/1 | © REMBE | All rights reserved | Valid from 10.10.2023 | Subject to technical change without notice Technical...