ODV Product Information
4Pages

{{requestButtons}}

Catalog excerpts

ODV Product Information - 1

ProduCt InformatIon odV Forward acting rupture disc GBPI-ODV-18024/0 | © REMBE | All rights reserved | Valid from 08.01.2018 | Subject to technical changes without notice for LoW to mEdIum PrESSurES ODV is primarily used for applications with low to medium pressures, e.g. for gases, liquids and applications with two-phase flows. The disc has a standard operating ratio of max. 80 %1. For burst pressures of less than 1 barg, ODV can be installed directly between flanges or angular rings. ODV has a three-layer design: The burst element is located on the side facing away from the process to protect it against corrosive media. The breaking points are cut into the burst element using lasers and define the burst pressure with outstanding precision. The sealing element prevents gases from escaping in normal operation. The vacuum support, as the name suggests, enables ODV to be used in processes with a vacuum. Your advantages • Suitable for use even with full vacuum due to integrated vacuum support. Depending on the specific application • Minimum fragmentation during opening. You can find detailed information and contact details for enquiries relating to ODV at www.rembe.de. Give us a call on: T +49 2961 7405-0 or contact us via email: info@rembe.de.

Open the catalog to page 1
ODV Product Information - 2

PRODUCT INFORMATIONTechnical data ODV Sealing Membrane * Company names or trademarks combined with material descriptions are only used for description purposes. The product promoted is not product of the respective companies and trademarks. ** Different temperatures may apply for rupture discs with CE mark. Standard tolerance ±10 % including manufacture tolerance. Different sizes, pressure classes, temperatures, materials and fittings available on request.

Open the catalog to page 2
ODV Product Information - 3

PRODUCT INFORMATIONTechnical data ODV for installation directly between flanges (ODV-F) x o c o _C '5 *Replaces DIN 2631 and following. Different sizes, pressure classes, temperatures, materials and fittings available on request.

Open the catalog to page 3
ODV Product Information - 4

PRODUCT INFORMATION NPS DN Vent area burst [in] [mm] [cm2] min. Technical data ODV for installation between flat steel/angular rings (ODV-FL)pressure Standard A B H max. BC Bore 0 Number Flat steel max. vacuum [mm] [mm] [mm] bolt [mm] of ring up to Angular ring from 8" / DN 200 [mm] Different sizes, pressure classes, temperatures, materials and fittings available on request. Consulting. Engineering. Products. Service. a o cl CO a REM BE® GmbH Safety + Control Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714...

Open the catalog to page 4

All REMBE® GmbH Safety+Control catalogs and technical brochures

  1. PROCESS SAFETY

    40 Pages

  2. KUB® CLEAN

    2 Pages

  3. FARADO® I

    2 Pages

  4. KUB®

    5 Pages