PRODUCT INFORMATION Explosion Venting EXPLOSION VENT FOR HIGH TO FULL VACUUM AND PRESSURE CYCLING GBPI-ODV-15143/3 | © REMBE® | All rights reserved | Valid from 08.05.2019 | Subject to technical change without notice ODV explosion vent is used under demanding vacuum to overpressure cyclic operating conditions. Designed for working pressures of up to 80 % of static burst pressure. The ODV is ideal for use in applications such as filters with frequent jet-pulse cleaning, high vacuum or suction conveyors. It is vacuum resistant and the standard explosion pressure is 0.1 bar at 22 °C (71.6 °F). The ODU explosion vent is ideal for applications that involve pressure cycling but no vacuum. In this version, the vacuum support used on the ODV is replaced by a supporting lower section. Mechanism When pressure rises, the explosion vent opens at the defined breaking point and releases pressure out of the vessel into the surrounding area. Technical data* Standard burst pressure Pstat Max. permitted operating pressure Stainless steel ± 15 % at standard burst pressure *Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions. Your advantages • L ow response pressure with full vacuum resistance is possible. • High working pressure resistance of the explosion vent offers maximum productivity for your processes. • Triple-section domed construction ensures high-pressure cycling resistance and exceptional service life. ATEX EC type examination certificate no. FSA 04 ATEX 1538 X • Round versions and special customised solutions possible. You can find detailed information and contact details for enquiries relating to ODV and ODU explosion vents at www.rembe.de. Or just give us a call on: T +49 2961 7405-0, info@

PRODUCT INFORMATION Installation with flanges and counterflanges. Installation with lock nuts and counterflanges. Explosion vent Threaded bolt essel wall V (opening dimensions + 0/− 2 mm) Angular frame Standard dimensions Installation with welded threaded bolts and counterflanges. GBPI-ODV-15143/3 | © REMBE® | All rights reserved | Valid from 08.05.2019 | Subject to technical change without notice Standard dimensions Standard dimensions Max. size of wall opening – nominal vent dimensions [mm] Effective venting area [cm2] Max. size of wall opening – nominal vent dimensions [mm] Effective venting...