product information for isolating safety valves The KUB® V rupture disc protects safety valves against corrosive solids or adhesive media and is installed upstream of the safety valve inlet. It is certified to resist a back pressure of 135 %* of the defined burst pressure and thus enables you to test safety valves in-situ without having to remove the valve for servicing. Your advantages • Longer service life and service intervals for the safety valve due to isolation of the valve from the process. • Reduction in safety valve maintenance costs and the amount of production downtime required by in-situ tests. • You can use safety valves manufactured from lower cost materials because they are isolated from the process medium during normal operation. • Leak-tight design prevents emissions. * Depending on the specific application I Made ■ in I Germany Technical data *Vent area compliant with PED certification, MNFA (ASME Sec. VIII, Div. 1) may vary. Different sizes, pressure classes, temperatures, materials and fittings available on request. Consulting. Engineering. Products. Service. REM BE® GmbH Safety + Control Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714 [email protected] | www.rembe.de