PRODUCT INFORMATION GBPI-KUB-20171/1 | © REMBE® | All rights reserved | Valid from 02.11.2020 | Subject to technical changes without notice Reverse acting rupture disc ENGINEERED TO LAST: ROBUST, HIGH PERFORMANCE, RUPTURE DISC SOLUTION Your advantages The KUB® is the only rupture disc to be manufactured using Euler's critical load formula to determine the burst pressure, creating the most robust, high-performance rupture disc available. Unlike other rupture disc solutions where a weak point is created in the metal, the KUB® is a unique, highly engineered solution, benefiting from a series of buckling pins which accurately collapse for reliable, full bore, opening. As there is no specific weak point on the rupture disc, the KUB® is an extremely robust solution, almost immune to damage by incorrect handling, improper installation or even being dropped! This maximises the lifespan of the disc and minimises long-term investment by lowering ongoing replacement costs. The KUB® features a two-layer design, with the smooth, unblemished surface of the sealing membrane facing the process minimising the possibility of damage due to corrosion. • Virtually immune to damage during installation, transport or storage – maximises process uptime and unnecessary replacement costs. Boasting a 98% operating ratio, the KUB® is not subject to fatigue even at higher operating pressures* and in the most demanding of process conditions in vapour, gas, liquid or two-phase applications. Unlike many other reverse acting discs, the unique construction of the KUB® makes it fully compatible with liquid-only applications, maximising installation points which can benefit from this rupture disc, simplifying customers' installation, maintenance and purchasing routines. • Unique buckling pin element – creates the most robust rupture disc design available. • Reinstall and reuse with ease after inspection – guarantees maximum lifespan of one rupture disc, reducing spares costs. •E xtend safety valve lifespan – robust design protects valves from process media, reducing corrosion risk and maximising overall investment. • Widest size and burst pressure range in a single reverse acting disc – one-disc type suitable for a wide range of process conditions, improving purchasing, inspection and maintenance routines. •C ompatible with liquid-only applications – maximises installation points where the benefits of this technology can be achieved. *Depending on the specific application. REMBE® Innovation – unique in the market: The KUB® rupture disc has a robust design and can be removed, inspected, cleaned and reinstalled. Any damage is easy to detect with the naked eye. You can find detailed information and contact details for enquiries relating to KUB® at www.rembe.de. Give us a call on: T +49 2961 7405-0 or contact

PRODUCT INFORMATION Inspect and reinstall with ease for all REMBE® reverse acting rupture discs. If the process conditions change in future, e.g. the burst pressure, only the rupture disc needs to be replaced. Used together with REMBE®'s reusable NIMU detection system for a full rupture disc assembly, ensuring reliable notification in the event of disc burst. Simple to install, the KUB® is also extremely easy to remove and reinstall during routine cleaning or maintenance checks without concerns of damaging the disc. Installed into an IG-KUB® Holder, the KUB® is a torque-independent design which...

PRODUCT INFORMATION Process medium Burst Pressure Range (PED) Vent area Liquid with gas cushion Two phase flow Hygienic applications Recommended Suitable Material Specific Parameters GBPI-KUB-20171/1 | © REMBE® | All rights reserved | Valid from 02.11.2020 | Subject to technical changes without notice Burst pressure SS/SS

PRODUCT INFORMATION Material Specific Parameters Burst pressure SS/Inc Material Specific Parameters Burst pressure GBPI-KUB-20171/1 | © REMBE® | All rights reserved | Valid from 02.11.2020 | Subject to technical changes without notice Material specific parameters should be considered in combination with the applicable certification. Due to different type testing requirements, deviations in technical parameters are possible. SS = Stainless Steel; Has = Hastelloy; Inc = Inconel; Ni = Nickel; Mo = Monel; Ti = Titanium; Ta = Tantalum Company Names or trademarks combined with material descriptions...