REMBE® graphite rupture discs offer you the familiar REMBE® quality and reliability - even in extremely corrosive media, low pressures and high temperatures. Like all REMBE® rupture discs, the graphite rupture discs are also manufactured in Germany. The maximum working pressure is 80 %* of the minimum burst pressure. Your advantages • Highest temperature resistance (+1,500 °C under inert conditions) and leak-tightness due to an innovative coating. • FDA conformity**. • Highest corrosion resistance. REMBE® graphite rupture discs are applicable for highest temperatures by using a unique chemical vapour deposition method (PyC coating). The rupture discs are applicable from -180 °C up to +500 °C under oxidizing and reducing atmosphere, +1,500 °C under inert conditions. Versions with vacuum and back pressure support are also suitable for the above mentioned operating conditions. Depending on the application and nominal pipe size, the rupture discs are installed directly between flanges. If required, you will also receive a suitable signalling device which, in conjunction with your process control system, will inform you about the rupture disc's response. Nominal pipe size available from DN 15 (1/2'') to DN 600 (24'') with burst pressures from 20 mbarg (~0.3 psig) to 63 barg (~900 psig). I Made ■ in I Germany • Extra long service life. • Temperature-independent material properties and burst pressures. • Product purity (carbon content > 99.9 % for PyC coating). • Reusable vacuum support. • Simple installation. * Depending on the respective application. ** Excluded processes with infant food and breast milk.

PRODUCT INFORMATIONTechnical data DN [mm] Other nominal pipe sizes and pressure classes are available upon request. GRX®-UK: Graphite rupture disc, inverted design for low and medium pressures. GRX®-UKV GBPI-GRX-17319/1 | © REMBE® | All rights reserved | Valid from 03.04.2019 | Subject to technical changes without notice. GRX®-MT: Graphite rupture disc, mono type for medium and high pressures. Consulting. Engineering. Products. Service. REMBE® GmbH Safety + Control Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714 [email protected] | www.rembe.de