Catalog excerpts
PRODUCT INFORMATION FARADO® I FOR USE WITH MOBILE TANKS sAND TRUCKS o c o sz The self-monitoring grounding system FARADO® I has been developed for the grounding during the filling and emptying of mobile tanks and trucks. The grounding clamp SRC-2 is connected to the object to be grounded. The FARADO® I checks the contact of the grounding clamp through a capacitance measurement. If the FARADO® I detects the grounded truck, the pumps, valves or mechanical conveyors connected to the ground relay are activated for the filling process. The connection between the o 3 clamp and the object is permanently monitored. E £ If the clamp fails or falls off, the grounding relay will output ■g ip a corresponding signal and the filling process will be interrupted. Under special weather conditions, such as wet conditions, it is possible that the preset capacity will not be reached. Connected pumps and valves will OJ) then no longer be enabled. Here, FARADO I® offers the possibility to switch from the capacitive ® to the resistive mode. O The resistive mode will then check O whether a CsZ grounding connection has been established. Product overview & optional accessories FARADO® I Short name Description FARADO® I with 5 m cable + clamp SRC-2 FARADO® I with 10 m cable reel + clamp SRC-2 Cable reel CR-1 (10 m) with grounding clamp SRC-2 Grounding clamp SRC-2 bipolar Isolated clamp parking location Electronic key for calibration and bypass Replacement metal cable gland made of EEx-d W" NPT; Cable diameter 7-10 mm Metal screw cap EEX-d W" NPT Electronic board for FARADO® I
Open the catalog to page 1PRODUCT INFORMATION FARADO® I FOR USE ON BIG BAGS, TYPE C Product overview & optional accessories FARADO® I FIBC Short name Description 100-30-FIBC The self-monitoring grounding system FARADO® I FIBC has been specially developed for the grounding during the filling and emptying of flexible bulk material containers named Big Bags, type C. For an effective grounding, two FIBC grounding clamps are attached diagonally to the grounding straps of the Big Bag. The FARADO® I FIBC detects whether the Big Bag is grounded through to the resistance. When properly grounded, the potential-free contact...
Open the catalog to page 2All REMBE® GmbH Safety+Control catalogs and technical brochures
-
PROCESS SAFETY
40 Pages
-
Explosion Safety
56 Pages
-
KUB® CLEAN
2 Pages
-
FARADO® I
2 Pages
-
SINGLE LAYER RUPTURE DISC
2 Pages
-
KUB®
5 Pages
-
REMBE® PROCESS SAFETY
39 Pages
-
Explosion Venting ETX™
2 Pages
-
KUB® Product Information
3 Pages
-
Grounding Accessories
2 Pages
-
Brochure Explosion Safety
40 Pages
-
Q-Box Product Information
2 Pages
-
Q-Rohr Product Information
4 Pages
-
EGV Product Information
2 Pages
-
Rupture Disc Holder IG-HL
2 Pages
-
Rupture Disc Holder IG
3 Pages
-
CBS Product Information
1 Pages
-
SFD Product Information
1 Pages
-
STAR Product Information
1 Pages
-
ODV Product Information
4 Pages
-
IKB Product Information
2 Pages
-
KUB F Product Information
1 Pages
-
KUB V Product Information
1 Pages
-
KUB Product Information
3 Pages
-
EDP Product information
2 Pages
-
ODV+ODU Product Information
2 Pages
-
EGV HYP Product information
2 Pages