PRODUCT INFORMATION Explosion Venting FOR LOW TO MEDIUM PRESSURE AND ALTERNATING PRESSURE The only vent panel with USDA approval GBPI-ERO-19087/1 | © REMBE® | © REMBE® | All rights reserved | Valid from 04.02.2021 | Subject to technical change without notice Applications The ERO sanitary venting device is used in a broad range of system areas in the pharmaceutical, chemical and food industry. The smooth and closed stainless steel membrane facing the process side optimally seals the vessel, thus enables sterilization of the vent panel while installed. The hygienic and robust design enables a reliable response, even at the lowest burst pressures. The operating pressure is at 75% of the minimum burst pressure. Mechanism In case of a sudden pressure increase, the ERO vent panel will open and release the pressure from the vessel. Your advantages Technical data Standard burst pressure pstat Max. permitted operating pressure 75 % of pstat Temperature Stainless steel Gasket material silicone, EPDM +/- 25% at standard burst pressure Standard vacuum resistance Available on request, depends on diameter nominal and geometry • The only vent panel with USDA approval. •E asy and safe to maintain sterile through the special design of the ERO. • Easy installation and low maintenance effort. SIL equivalent SIL 4 ATEX EC type examination certificate no. FSA 04 ATEX 1538 X Consulting. Engineering. Products. Service. Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714 [email protected] | www.rembe.