PRODUCT INFORMATION Explosion Venting EGV FOR ZERO TO LOW PRESSURE OR VACUUM Applications From spray dryers, elevators and chain conveyors to screens with light vibration, silos with mechanical filling and cyclones – the EGV is suitable for use in a wide range of applications in all sectors for both non-pressurised processes and processes with low vacuum or overpressure (up to 50 % of static burst pressure). The standard burst pressure is 0.1 bar at 22 °C (71.6 °F). GBPI-EGV-15119/3 | © REMBE | All rights reserved | Valid from 22.04.2021 | Subject to technical change without notice When pressure rises, the explosion vent opens at the defined breaking point and releases pressure out of the vessel into the surrounding area. Your advantages •H igh venting capacity and full bore opening due to low surface weight. •H igh stability and opening speed through integrated bionic structure. Technical data* Standard burst pressure Pstat Max. permitted operating pressure Stainless steel Gasket material FDA approved silicon gasket ± 20 % at standard burst pressure Standard vacuum resistance 50 % of set pressure at non-pulsating processes Recommended torque for M10 screws *Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions. • Direct installation of the explosion vent even on round vessels prevents accumulation of deposits and bacteria formation. No complicated flange constructions required. •A dapts perfectly to your process due to the wide range of EGV geometries available. •Q uick and easy installation as EGV is torque independent. No additional counter frame required. •S ignificant space savings due to the integrated gasket and frame in the explosion vent. • Guaranteed leaktight integrity. Independently verified. ATEX EC type examination certificate no. FSA 04 ATEX 1538 X You can find detailed information and contact details for enquiries relating to EGV explosion vents at www.rembe.de. Or just give us a call on: T +49 2961 7405-

PRODUCT INFORMATION Installation with welded threaded bolts. Installation with lock nuts. Installation with flanges. Explosion vent (bursting element, integrated gasket and integrated frame) Bursting element Integrated gasket Angular frame Vessel wall (opening dimensions + 0/− 2 mm) Threaded bolt Standard dimensions GBPI-EGV-15119/3 | © REMBE | All rights reserved | Valid from 22.04.2021 | Subject to technical change without notice Standard dimensions Standard dimensions Max. size of wall Effective venting opening – nominal vent area [cm2] dimensions [mm] Max. size of wall Effective venting opening...