- Catalogs
- REMBE® GmbH Safety+Control
- EDP Product Information
EDP Product Information
EDP Product Information
The document provides technical information about a domed, single-layer explosion vent designed for processes with medium vacuum or overpressure and slight pressure cycling. It is particularly suitable for vessels with pneumatic filling equipment and for filters and sieves with strong vibration. The standard bursting pressure is 0.1 bar at 22°C (71.6°F).
- High stability and pressure cycling resistance due to the domed construction.
- Quick and easy installation with independent torque, requiring no additional counter frame.
- Space-saving design with integrated gasket and tensioning frame.
- Standard burst pressure: 0.1 bar at 22°C (71.6°F).
- Maximum permitted operating pressure: Up to 70% of the standard burst pressure.
- Temperature range: −40 to +180°C (−40 to +356°F).
- Material: Stainless steel with gasket materials including EPDM, silicon, and foam rubber.
- Tolerance: ±20% at standard burst pressure.
- Standard vacuum resistance: Up to 500 mm H₂O (WC) for areas up to 0.64 m² and up to 300 mm H₂O (WC) for areas from 0.65 m².
- Recommended tightening torque for M10 bolt: 15 – 20 Nm.
- Certified according to EN 14797 and EN 10204-3.1 inspection certificate.
- ATEX EC type examination certificate no. FSA 04 ATEX 1538 X.
- SIL equivalent SIL 4.
- Installation with angular frame.
- Installation with welded threaded bolts.
- Installation with lock nuts.
- Installation without counter frame.
- Various standard dimensions and effective venting areas are provided, with maximum vacuum resistance specified for each size.
- Installation diagram includes components such as nut, washer, burst element, opening, edge, integrated gasket, threaded bolts, explosion vent, vessel wall, bolt, lock nut, and angular frame.
For further assistance, contact REMBE at Gallbergweg 21, 59929 Brilon, Germany, or visit their website at www.rembe.de.
Catalog excerpts
PRODUCT INFORMATION Explosion Venting GBPI-EDP-15083/3 | © REMBE | All rights reserved | Valid from 17.01.2018 | Subject to technical change without notice THE EXPLOSION VENT FOR LOW TO MEDIUM VACUUM + PRESSURE CYCLING The domed, single layer explosion vent is suitable for use in processes with medium vacuum or overpressure (up to 70 % of min. response pressure (pstat)) and slight pressure cycling. It is particularly suitable for vessels with pneumatic filling equipment and for filters and sieves with strong vibration. The standard bursting pressure is 0.1 bar at 22 °C (71.6 °F). Technical data* Standard burst pressure Pstat Max. permitted operating pressure Stainless steel Gasket material EPDM, silicon, foam rubber ± 20 % at standard burst pressure Standard vacuum resistance Your Advantages • The domed construction provides high stability and pressure cycling resistance. Recommended tightening torque for M10 bolt *Our specialists will be pleased to assist you in finding a solution that matches your specific operating conditions. • Quick and easy installation while torque is independent. No additional counter frame required. • Significant space savings due to the integrated gasket and tensioning frame in the explosion vent. Certified in accordance with Inspection certificate ATEX EC type examination certificate no. FSA 04 ATEX 1538 X
Open the catalog to page 1
PRODUCT INFORMATION Installation options Standard dimensions Max. size of wall opening – nominal vent dimensions [mm] Installation with angular frame. Installation with welded threaded bolts. GBPI-EDP-15083/3 | © REMBE | All rights reserved | Valid from 17.01.2018 | Subject to technical change without notice Effective venting area [cm2] Other dimensions available on request. Installation with lock nuts. Burst element Explosion vent (burst element, integrated gasket and integrated tensioning frame) Vessel wall (opening dimensions + 0/− 2 mm) Integrated gasket Threaded bolts Angular frame Installation...
Open the catalog to page 2All REMBE® GmbH Safety+Control catalogs and technical brochures
FRD Product Information2 Pages
SFD Product Information3 Pages
STAR Product Information3 Pages
IKB Product Information3 Pages
KUB® Product Information4 Pages
TEP Produkt Information1 Page
EGV Product Information2 Pages
ODV+ODU Product Information2 Pages
EGV HYP Product Information2 Pages
REMBE® iQ SAFETY COCKPIT™2 Pages
Q-Bic™ Product Information2 Pages
Brochure Process Safety56 Pages
Brochure Explosion Safety56 Pages
Q-Rohr® Product Information4 Pages
ERO1 Page
CO.Pilot1 Page
KUB® CLEAN2 Pages
SINGLE LAYER RUPTURE DISC2 Pages
Explosion Venting ETX™2 Pages
KUB® Product Information3 Pages
Grounding Accessories2 Pages
Archived catalogs
Q-Rohr Product Information4 Pages
CBS Product Information1 Page
- Valve
- Connector
- Electrical cable
- Data connector
- Pneumatic valve
- On/off valve
- Industrial camera module
- Copper cable
- Copper electrical cable
- Infrared imager
- Power cable
- Monitoring camera system
- Process software
- Terminal box
- Insulated cable
- Insulated electrical cable
- Multi-strand cable
- Gate valve
- Multi-wire electrical cable
- Valve for the chemical industry