Direct mounting on 35 mm rail mount acc. to EN 60715 • Wide range of ambient temperature: from -25°C up to +71°C • Cover - plastic, modular - width 71 mm; for distribution boards and distribution boxes Indicator of output voltage presence - green LED (DC OK) Cooled by free air flow (convection) • Applications: in industrial automation, for supplying commercial and industrial appliances and building automation • Recognitions, certifications, directives: RoHS, C€ EH[ © PARD (20 MHz): Periodic and Random Deviation from the power supply’s output DC voltage measured at 20 MHz bandwidth. © Latch-off mode: disconnecting the output voltage, restore correct operation after restarting. © Hiccup mode: non-latching, auto-recovery when the fault is removed. © Fold Forward mode: current rises, voltage drops. © Connection of PE protective wire is not required. Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]

© Criteria A: normal performance within the specification limits. 0 Common mode: asymmetrical (line to earth); differential mode: symmetrical (line to line). © Warning: this is a Class A product. In a residential, commercial or light industrial environment it may cause radio interference. This product is not intended to be installed in a residential environment; in a commercial and light industrial environment with connection to the public mains supply, the user may be required to take adequate measures to reduce interference. Output terminals DC voltage adjustment potentiometer Input terminals...

Mounting Power supplies RZI60-12-M, RZI60-24-M © are designed for direct mounting on 35 mm rail mount acc. to EN 60715 or on panel mounting with two M3 screws - they are delivered ready to install. Operational position - input terminals downwards. Connections: conductor cross section: RZI60-12-M - 0,25...4,0 mm2 (24...12 AWG), RZI60-24-M -0,34...4,0 mm2 (22...12 AWG), input terminals: 2 screws M4 (25 A / 300 V), output terminals: 4 screws M4 (25 A / 300 V). © Safety instruction for mounting: to guarantee sufficient convection cooling, keep a distance of 50 mm above and below the device as well...