Input circuit Self-operating control lamps (optic signaling of AC/DC voltage presence in 1-phase network via lighting of one non-replaceable LED) Cover - modular, width 17,5 mm Direct mounting on 35 mm rail mount acc. to EN 60715 Applications: in low-voltage systems Compliance with standards: EN 62094-1, EN 61000-4-2,3,4,5,6,11 Recognitions, certifications, directives: Supply voltage AC: 50/60 Hz AC/DC © With the use of a light element (LED located in the center of the face panel), phase decay is promptly recognizable. The signal of the LED is well visible even at strong light, and its brightness depends on the current value of the supply voltage. © Length with 35 mm rail taps: 98,8 mm. Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]

Front panel description Connection diagram 1-phase network Note: in case an overcurrent circuit breaker of 25 A or more is installed before the point of connection of the lamp to the mains, the connection circuit of the lamp shall be additionally equipped with a fuse of not more than 6 A. Ordering codes Mounting Lamps RLK-1 are designed for direct mounting on 35 mm rail mount acc. to EN 60715. Operational position - any. Connections: max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal...