Belts and Pulleys
9Pages

Section Contents

Timing Belts 2.5mm Pitch All dimensions in mm Material: High tensile steel reinforced polyurethane Associated Products Timing pulleys: page 10-3 Part number selection table Example Part No:- Basic Part Number Belt Width Features and options • Temperature range: -10°C to +80°C • Maximum allowable peripheral load: 6 mm wide = 65 N • Maximum peripheral speed: 80 m/s • Special polyurethanes available • Double-sided belt available • Alternative lengths available • Alternative colours available • Kevlar tension members available • Anti-static belts available Technical support • Technical...

Timing Pulleys Associated Products Intelligent motors: page 2-2 Shafts: page 11-2 Timing belts: page 10-2 All dimensions in mm Materials: Aluminium alloy pulley, zinc plated steel flanges When belt width = 6, W=10 & L=16 Part number selection table Basic Part Number Belt Width Pitch Diameter *Pulleys with 48 and 60 teeth are unflanged Zero-backlash pulleys Other numbers of teeth available 0, 1 or 2 flanges available Tapped holes in hubs available Alternative bore diameters available Alternative mountings available Keyed bores available Technical support • Technical information - see page...

Timing Belts All dimensions in mm Associated Products Material: High tensile steel Timing pulleys: page 10-5 reinforced polyurethane Part number selection table Standard Lengths • Maximum allowable peripheral load: • Maximum peripheral speed: 80 m/s • Special polyurethanes available • Double-sided belt available • Alternative lengths available • Alternative colours available • Kevlar tension members available • Anti-static belts available Technical support • Technical information - see page T10-1 • Design guidelines - see page T10-2 Contact us for product information, design support and...

Timing Pulleys Associated Products Intelligent motors: page 2-2 Shafts: page 11-2 Timing belts: page 10-4 All dimensions in mm Materials:aluminium alloy pulley with zinc plated steel flanges When belt width = 10, W=15 & L=21 When belt width = 16, W=21 & L=27 Part number selection table Basic Part Number Belt Width *Pulleys with 48 and 60 teeth are unflanged Zero-backlash pulleys Other numbers of teeth available 0, 1 or 2 flanges available Tapped holes in hubs available Alternative bore diameters available Alternative mountings available Keyed bores available Technical support • Technical...

Systems Overview Intelligent Motors and Motorised Actuators Planetary and Right Angle Gearboxes Brass, Ground and Precision Spur Gears Worms and Wheels, Bevels and Internal Gears Round and Rectangular Racks and Pinions Leadscrews and Leadscrew Assemblies Flexible Shaft Couplings, Clutches and Collars Linear Guides and Slides Gear Clamps and Accessories Machine Screws, Dowel Pins and Hardware Technical Information Contact us for product information, design support and custom solutions

Systems Overview Intelligent Motors and Motorised Actuators Planetary and Right Angle Gearboxes Brass, Ground and Precision Spur Gears Worms and Wheels, Bevels and Internal Gears Round and Rectangular Racks and Pinions Leadscrews and Leadscrew Assemblies Flexible Shaft Couplings, Clutches and Collars Linear Guides and Slides Gear Clamps and Accessories Machine Screws, Dowel Pins and Hardware Technical Information Rowley Mills, Penistone Road, Lepton