CHA1 1 pole | changeover contact | auxiliary contact Main circuit Available contact materials Maximum contact load Recommended minimum contact load Rated load Inrush current AC load DC load Mechanical endurance (cycles) Electrical endurance at rated load AC-1 (cycles) Control circuit Nominal voltage Operating voltage range Pick-up voltage Release voltage Power consumption AC / DC see table product references 0.8 UN … 1.1 UN ≤ 0.8 UN ≥ 0.1 UN 0.75 VA / 0.5 W Insulation Test voltage open contact Test voltage contact / coil Pollution degree Overvoltage category General data Ambient temperature storage (no ice) Ambient temperature operation Pick-up time / bounce time Release time / bounce time Conductor cross section screw terminal Protection degree Mounting Dimension Weight Housing material Green ON-OFFswitch Check back contact Product reference Description «…» List coil voltage to complete product references Technical approvals, conformities Standards Approvals

2. Type C = Combined version (Socket and Relay) 3. Contact 1 = One change-over contact 2 = Two change-over contact Jumper link 7. Supply voltage UC = AC/DC Screw DC = Only for C1x5 and C1x8 terminals 5. Rated control voltage 12 V, 24 V, 48 V, 60 V* 3. Contact 11 = 1x AgSnO 2 12 = 1x AgSnO2 + 3µ Au 15 = NO / Solid-state DC 18 = NO / Solid-state AC Label = 2x AgSnO 21 2 22 = 2x AgNi + 3µ Au Push-in 23 = 2x AgNi Jumper Link *60 V Relay used for all sockets with a nominal voltage higher or equal 60V 6.2 Jumper Link Jumper link Jumper Link Screw terminals Cage CINT-5x clamp 97.5 Screw terminals Jumper...