2.2 Multifunction Time Relays Time data Timing functions Timing range Timing scale Main circuit Number of contacts Contact material Rated voltage Rated current Minimum load Inrush current Rated load DC Rated load AC-1 Mechanical endurance (cycles) Electrical endurance at rated load AC-1 (cycles) Control circuit Nominal voltage Operating voltage range Power consumption AC / DC Current consumption on supply A1-A2 AC / DC Threshold voltage on input control B1 AC / DC Rated frequency Insulation Rated test voltage control / main circuit Rated test voltage open contact Pollution degree Overvoltage category General data Ambient temperature storage (no ice) Ambient temperature operation Conductor cross section Nominal screw torque Dimensions Weight Protection degree Housing material 2.2 Multifunction Time Relays fig. 2. DC load limit curve 10 Product reference Other voltages on request. Please contact [email protected]. «…» list control circuit voltage to complete product references. Standards and approvals Standards

Time functions Delay functions Shot timing modes S R on with delay (t1) S OFF R off with delay (t2) S (pulse or continuous contact) R on for t S no influence on R and t S (pulse or continuous contact) R on for t S on for t = t RESET S (pulse or continuous contact) R after t1 on for t2 S no influence on R and t On delay single shot S R on/off periodically according to t S OFF: last pulse = t Blinker, interval start S R after t on/off periodically according to t S OFF R off Repeat cycle timer, pulse start S R on/off periodically according to t1 and t2 S OFF R off Repeat cycle timer, interval start...

Plug-in Time Relays Function Type Function Type Function Type Plug-in Time Relays * TF-60 Setting of long times The TF60 time setting methode permits short examination of long delay time settings. Elapsing times of hours can be monitored in the sec. range. Example for a delay time of 38h: 1. Set range switch to 60sec 2. Set 38sec on the potentiometer (e.g. check 38sec by chronometer) 3. Set range switch to 60h The delay time now amounts to 38h. alternatively with instantaneous contact  without auxiliary voltage (relay bistable)  without auxiliary voltage (relay monostable) Modular plug-in Time...