Reka Glue Guns Pneumatic The TR 700 cartridge gun applies hot-melt adhesives from 310 ml aluminium cartridges in dots, beads, or other standard nozzle forms. The TR 700 lets you apply hot-melt adhesive as dots and lines. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. The working-temperature of the glue applicator is controlled by a thermostat and set to 120 °C. The TR 700 glue gun uses 310 ml aluminium hot-melt glue cartridges, which for instance can contain PUR- hot-melt glue or POR-hot-melt adhesive. The cartridges can be swapped easily and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.

Technical Data Article Number Weight Power Supply Power Consumption Current Consumption Degree of protection Class of protection Temperature control Temperature limitation Operating temperature Consistency of temperature Heat-up time Gross Tank Capacity Conveying system Operating pressure Length of electric cord Length of air tube Length of connection kit Recommended melts TR 700 5385 (230 V) 5370 (120 V) 1400 g 230 V / 50 Hz 120 V / 60 Hz 600 Watt (230 V) 400 Watt (120 V) 1,75 A I IP 30 Thermostat Temperature monitor 120 °C ± 5 °C approx. 3 – 10 min. 310 ml Air pressure 0,5 – 6 bar 8,5 m 3m...