Reka Glue Guns Pneumatic Process hot-melt adhesive comfortably and precisely with the TR 50.4. The TR 50.4 glue gun lets you apply hot-melt adhesive as beads and lines. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. The working-temperature of glue applicator is controlled by a thermostat and can be adjusted from 20 to 200 °C. The Reka TR 50.4 can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages of different shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.

Technical Data Article Number Weight Power Supply Power Consumption Current Consumption Degree of protection Class of protection Temperature control Temperature limitation Operating temperature Consistency of temperature Temperature indication Heat-up time Gross Tank Capacity Conveying system Operating pressure Length of electric cord Length of air tube Length of connection kit Recommended melts TR 50.40 5327 (230 V) 5333 (120 V) 1200 g 230 V / 50 Hz 120 V / 60 Hz 600 Watt (230 V) 400 Watt (120 V) 1,75 A I IP 30 Thermostat Temperature monitor 20 – 200 °C ± 5 °C analog approx. 3 – 10 min. 250...