Catalog excerpts
Reka Glue Guns Pneumatic The TR 80 LCD Cartridge Hot-Spray-System consists of the TR 80 LCD Cartridge gun and the stand with pressure regulator and manometer. The TR 80 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the glue gun TR 80 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation, the glue gun is ready to work within 3 - 10 minutes. Further more, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hot-melt glue. A LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The spray applicator uses 310 ml aluminium hotmelt glue cartridges, which for instance can contain PUR-hot-melt adhesive or POR-hot-melt glue. The cartridges can be swapped easy and hassle-free. The optional cartridge pre-heater KVG heats up the glue before use and increases the possible glue output per hour. A cartridge glue gun in combination with empty cartridges lets you test and process different hotmelts within a short period of time. This is especially useful for working in laboratories or when qualifying a new hot-melt adhesive for a big production line. Hot-Melt Adhesive Spray System TR 80 LCD
Open the catalog to page 1Technical Data Article Number Weight Power Supply Power Consumption Current Consumption Degree of protection Class of protection Temperature control Temperature limitation Operating temperature TR 80 LCD TR 80 LCD 5454 (230 V) 5463 (120 V) 1400 g 230 V / 50 Hz 120 V / 60 Hz 650 Watt 400 Watt 1,75 A I IP 30 Electronic Temperature monitor 50 – 210 °C 50 – 210 °C Consistency of temperature Temperature indication Heat-up time Gross Tank Capacity Conveying system Operating pressure Length of electric cord Length of connections (stand to handgun) ± 2 °C digital approx. 3 –10 min. 310 ml Air...
Open the catalog to page 2All Reka Klebetechnik GmbH & Co. KG catalogs and technical brochures
-
TR 700 cartridge Gun
2 Pages
-
GLUE GUNS FOR STICKS
2 Pages
-
TR 502
2 Pages
-
TR 505
2 Pages
-
MS 200
2 Pages
-
MS 200.2
2 Pages
-
MS 80
2 Pages
-
TR 50.40
2 Pages
-
TR 60 LCD
2 Pages
-
TR 70 LCD
2 Pages
-
Nozzles for all guns
14 Pages
-
Cartridge Preheater
2 Pages
-
Premelter VSB 40
2 Pages
-
TR70 LCD cartridge gun
2 Pages
-
TR700 cartridge gun
2 Pages
-
hot melt applicator TR50.4
2 Pages
-
hot melt applicator MS80
2 Pages
-
Additional Nozzles
4 Pages
-
glue gun for sticks
2 Pages