Operating Instructions TR 101 Translation from German to English

Table of Contents General Safety Instructions Product Description During Operation Cleaning and Maintenance Replacement of Nozzles Tips for Glueing Additional Information Additional Nozzles CE Declaration of Conformity Technical Data

General Safety Instructions The working temperature of the glue must not be exceeded. You may find it in the technical datasheet of the respective glue. Overheating may lead to decomposition which may affect the health of the user as well as the operability of the applicator. Once the applicator has warmed up, nozzle and lid are very hot. Never start working before fitting a nozzle first. Only replace nozzle when applicator is warmed up. (60° 80° C device temperature). Unplug the connecting cable, before replacing a nozzle. Warning: risk of burns! When a nozzle is replaced, liquid glue might...

Applying Hot-Melt The quantity to be applied is determined by pulling the trigger: the more you pull the more glue is dispensed. When the feeding of glue sticks is stopped, the ball valve integrated in the nozzle will close, thus preventing liquid glue from leaking out. When the glue is used up so that it stops flowing out when the hand trigger is pressed, insert a new glue stick. Only use hotmelt that is suited to use with your applicator. Please mind the respective working temperature of the hotmelt (TR 500: approx. 115 200°C; TR 501: approx. 195°C; TR 502, TR 505, 101: approx. 190 200°C)*....

To achieve better bonding results ►the about to be bonded materials should be clean, free of fats and oils and dry. ►cold material like metal, stone and ceramic should be preheated. ►hot hotmelt should at first be applied to the surface which according to your experience builds up less adhesive strength to the hotmelt glue. Use a silicone mat or silicone paper as work underlay. A hotmelt destined for the respective bond can improve the result. Reka has a variety of different 11,3mm hotmelt glue sticks and will assist you making your choice (Tel: +49 721 970 780). List of possible fault indications...

Additional Nozzles Additional Information Please contact us by Phone +49 721 970 780 Telefax +49 721 705 069 EMail: [email protected] Our mailing address is: Reka Klebetechnik GmbH & Co. KG Siemensstr. 6 D76344 Eggenstein Internet: http://www.rekaklebetechnik.de

Environmental Protection Never throw electric tools in the domestic waste. According to the European directive 2002/96/EC for used electric and electronic devices and according to national regulations, used electric tools must be collected separately and treated in an environmentally compatible way for reuse. Reka packing material can be recycled completely. Please take instructions for the disposal of hotmelt glues and hotmelt cartridges from the respective safety datasheet. EU Declaration of Conformity Product: HotMelt Glue Applicator Type: TR 500 / 501 / 502 / 505 / 101 This is to certify...

Technical Data Power supply Power consumption Temperature control Operating temperature Magnetic deposit Removeable cable * When gun is cold, power consumption is very high (temporarily up to 500 W) ** Temperature continuously adjustable from 100205°C; hence, the gun also can work with LowTemperature glue sticks. *** Measured on the throughput during the first minute. Reka Klebetechnik GmbH & Co. KG Siemensstr. 6 D76344 Eggenstein Phone: +49 721 970 780 Telefax: +49 721 705 069 EMail: [email protected] Int