Multi-shaft-shredder RMZ 500-1000

Product catalog summary

Overview: The RMZ series four-shaft shredders, including models RMZ 500, RMZ 700 S, and RMZ 1000 S, are designed for efficient shredding of wood, plastics, and certain metals. These machines are equipped with a large hopper and four shafts to ensure high output with low power consumption, making them cost-effective solutions for waste management.

Specifications:

Hopper Opening: Width ranges from 1,000 mm to 1,400 mm, and length from 1,250 mm to 1,500 mm depending on the model.
Cutting Tool Opening: Width varies from 462 mm to 760 mm, and length from 562 mm to 1,000 mm.
Motor Output: Options include 2 x 11 kW to 2 x 30 kW, depending on the model.
Output Capacity: With a screen perforation of Ø 20 mm, output ranges from 300-1,500 kg, and with Ø 25-40 mm, from 500-2,000 kg.
Weight: Approximately 1,300 kg to 3,000 kg.
Dimensions: Vary by model, with sizes A, B, C, D, and E specified in mm.

Features:

The shredders feature a cutting system with two shafts of cutting blades and two shafts of broaching blades, with an option for all cutting blades.
Driven by cogwheels in a closed oil bath for durability.
Equipped with an electric control system to prevent overloading and automatic shutdown when the hopper is empty.
Additional breakers under the perforated screen prevent long chips, and the screen size determines chip size.

Contact Information: Reinbold Entsorgungstechnik GmbH, Robert-Mayer-Strasse 5, 74360 Ilsfeld, Germany. Phone: +49 (0) 7062 / 97885-0, Fax: +49 (0) 7062 / 97885-50, Email: [email protected], Website: www.reinbold.de

Catalog excerpts

Over Years „BEAR“ FORCE AND RELIABILITY FOUR SHAFT SHREDDER

Open the catalog to page 1

The RMZ 4 shaft shredder shreds easily waste of wood, plastics and some kinds of metal. Any waste getting in to the machine is standing on the cutting- or feeding blades which make the RMZ very efficient. Its also very common for long pieces and a rough grinding. This rugged shredder fitted with an electric control system to avoid a overloading and it switches the machine off if the hopper is empty. The large hopper and the 4 shafts guarantees an high output by a low power consumption, over al it's a machine with a very good cost-benefit analysis. The cutting system decreed over 2 shafts with...

Open the catalog to page 2

Multi-shaft-shredder RMZ 500-1000

Multi-shaft-shredder RMZ 500-1000

Catalog excerpts

All Reinbold Entsorgungstechnik catalogs and technical brochures