Horizontal shredder RHZ 400 - 1300S

Product catalog summary

Overview of Reinbold Material Shredders
Reinbold Entsorgungstechnik GmbH provides a comprehensive range of shredders and briquetting machines suitable for processing various materials such as wood waste, chipboard, and strips. These machines are designed for both long and short materials, offering efficient solutions for material shredding and briquetting.

Knife System and Efficiency
The shredders are equipped with a circular knife system that enhances efficiency and reduces operating costs. The concave ground circular cutting heads allow for high efficiency with minimal effort. The knives can be adjusted and turned up to eight times before replacement, enabling job-specific adjustments based on the material.

Rotor Versions
Different rotor versions are available to accommodate various knife diameters: Version 5 and 7 with 40 mm, and Version 8 with 30 mm. The new circular knife V8 replaces the outer broaching knife, ensuring uniform material crushing along the rotor's length.

Shredder Series and Specifications

RHZ Plus Series: Horizontal shredders for wood waste and chipboard, featuring a special link chain feed and a rotor diameter of 500 mm for increased throughput.
RLZ Series: Strip shredders with angled feeds for long thin wood waste, equipped with a load-controlled feed system that shuts off automatically when overloaded.
RB Series: Includes RB 400 RS - RB 600 RS for square briquettes and RB 20 SV - RB 50 SV for small briquetting presses.
RMZ Series: Four-shaft shredders ideal for long stock shredding.
AZR Series: Single shaft shredders for woodworking shops and professional compaction of recyclables.

Technical Specifications
The document provides detailed specifications for various models, including feed opening sizes, throughput rates, rotor diameters, power requirements, tool counts, screen perforation sizes, suction piece diameters, and approximate weights.

Shredding Solutions

Series AZR 600: A universal single shaft shredder designed for woodworking shops.
Series AZR 800 - AZR 2000 Gigant S: Single shaft shredders for professional compaction of recyclables.
RHZ Series: Includes models like RHZ 400 S, RHZ 1300 Plus Spezial, and RHZ 1000 Plus, featuring special chain feeds and circular knife systems for efficient cutting.

Briquetting Solutions

Series RB 400 RS - RB 600 RS: Designed for industrial production of square briquettes.
Series RB 20 SV - RB 50 SV: Small but powerful briquetting presses.
Series RB 100 - RB 300 Flexible S: Suitable for briquetting chips and dust.

Additional Information
Reinbold reserves the right to make technical changes and measurement adjustments. Images in the brochure may include optional equipment variants.

Contact Information
Reinbold Entsorgungstechnik GmbH, Robert-Mayer-Strasse 5, 74360 Ilsfeld, Germany. Phone: +49 (0) 7062 / 97885-0, Fax: +49 (0) 7062 / 97885-50, Email: [email protected], Website: www.reinbold.de

Catalog excerpts

Reinbold material shredders: application images Machines from the Reinbold product line: With special chain feed The circular knife system: Cutting knifes that lower your operating costs! * New at Reinbold: The outer broaching knife, are replaced by the circular knife V8. This promotes a uniform crushing of materials over the entire length of the rotor. Series AZR 600: The universal single shaft shredder for woodworking shops Series AZR 800 - AZR 2000 Gigant S: The single shaft shredder for professional compaction of recyclables Series RMZ 500 - RMZ 1000 S: The four-shaft shredder that is ideal for shredding long stock Series RB 20 SV - RB 50 SV: The small but powerful briquetting press Series RB 100 - RB 300 Flexible S: For briquetting chips and dust Series RB 400 RS - RB 600 RS: For the industrial production of square briquettes Rotor Version 5 (40 mm knife diameter) „BEAR“ FORCE AND RELIABILITY Rotor Version 7 (40 mm knife diameter) The highly efficient scissors cut of the concave ground circular cutting heads provide a very high work rate with very little effort. The knife holders are welded or mounted on the rotor and the round knives can be turned up to 8 times with just a few adjustments before having to be exchanged completely. The use of various types of knives enables job-related adjustment of the shredder to the material being processed. We reserve the right to make technical changes and measurement adjustments ver. 1.0 - 03/2018 / EN Images shown in this brochure may also contain optional equipment variants. Drawing on its many years of experience, Reinbold, with its broad range of machines, is able to offer ideal solutions for different applications in material shredding and briquetting. Our testing facility is available to perform tests on your material. Rotor Version 8 (30 mm knife diameter) Reinbold Entsorgungstechnik GmbH Robert-Mayer-Strasse 5 74360 Ilsfeld (Germany) The knives with horizontally integrated square knives are especially suitable for manufacturing granulate which can be used in cellulose production. Your dealer: HORIZONTAL SHREDDER

Open the catalog to page 1

Shredders with link chain feed, the RHZ 400 plus S - RHZ 1300 plus S series Compact construction, the RHZ 300 - RHZ 1300 S series The Reinbold RHZ series is equipped with smart details: Two feed rolls and special strips ensure better material feed and simpler loading of the machine. The optional second feed roll ensures optimal material intake and thus a constant high throughput. The feed unit is controlled based on load and shuts off automatically if there is too much material. Thus the rotor can continue shredding without malfunctioning and is not overloaded. Thus, a maximum throughput guarantees...

Open the catalog to page 2