- Catalogs
- Reifenhäuser Extrusion Technology GmbH & Co. KG
- Cast Film Line MIDEX 3-80/150/80-3000
Cast Film Line MIDEX 3-80/150/80-3000
1 / 2 PagesView full catalog
Cast Film Line MIDEX 3-80/150/80-3000
Product catalog summary
Technical Specifications:
- Line Type: 3-layer cast film line
- Extruders: 2 x 80 mm Ø - 30 D, 1 x 150 mm Ø - 30 D
- Forming: REIcofeed coextrusion block with channel pack and slot die BSD-CR03-2900
- Downstream Equipment: Includes haul-off unit with casting section, 800 mm Ø casting roll, suction nozzle, haul-off, cutting unit, pre-treating station, thickness gauge, and heating/cooling units
- Winder: MIDEX winder with 3000 mm nominal width
- Edge Trim Recycling: Film shredder, cyclone, transport unit, and recycling extruder
- Automation System: Slot die controlled by translator bolts or thermal expansion bolts
- Extrusion Capacity: Approximately 800–1000 kg/h
- Thickness Range: 0.020–0.200 mm
- Nominal Width: 2500–2600 mm
- Mechanical Speed: 250 m/min, depending on product dimensions and raw materials
- Suitable Materials: PP, LDPE, and other raw materials on demand
- Power (Installed Capacity): Approximately 1090 KVA
- Power (Consumption Factor): Approximately 70% during production
- Cooling Water Requirement: Approximately 50 m3/h at 10 °C inlet temperature
- Compressed Air: Approximately 9–11 Nm3/h
- Length: 24,000 mm
- Width: 11,700 mm (including control cabinets)
- Height: 7,300 mm
See more
Archived catalogs
Blown Film Winder FAC II2 Pages
Film Winder for Cast Films4 Pages
Related Searches
- Extrusion line
- Thermoplastic extrusion line
- LIMING twin screw extruder
- LIMING single screw extruder
- Multilayer extrusion line
- PP extrusion line
- LIMING PP extruder
- PE extrusion line
- LIMING compounding extruder
- LIMING PE extruder
- LIMING PVC extruder
- Flat-film extrusion line
- ABS extruder
- Compact extruder
- Blown film extrusion line
- PET extruder
- Extrusion line with water cooling
- Polystyrene extruder
- PC extruder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.