- Catalogs
- Reifenhäuser Extrusion Technology GmbH & Co. KG
- Cast Film Line MIDEX 3-60/120/60-2500
Cast Film Line MIDEX 3-60/120/60-2500
1 / 2 PagesView full catalog
Cast Film Line MIDEX 3-60/120/60-2500
Product catalog summary
Technical Specifications:
- Line Type: 3-layer cast film line
- Extruders: 2 x 60 mm Ø - 30 D, 1 x 120 mm Ø - 30 R
- Forming: REIcofeed coextrusion block with channel pack and slot die BSD-CR03-2400
- Downstream Equipment: Includes haul-off unit with casting section, 800 mm Ø casting roll, suction nozzle, haul-off, cutting unit, pre-treating station, thickness gauge, and heating/cooling units
- Winder: MIDEX winder with 2500 mm nominal width
- Edge Trim Recycling: Film shredder, cyclone, transport unit, and recycling extruder
- Automation System: Slot die controlled by translator bolts or thermal expansion bolts
Performance Data:
- Extrusion Capacity: Approximately 650–700 kg/h
- Thickness Range: 0.020–0.200 mm
- Nominal Width: 2000–2100 mm
- Mechanical Speed: 250 m/min, depending on product dimensions and raw materials
- Suitable Materials: PP, LDPE, and other raw materials on demand
Consumption Data:
- Power (Installed Capacity): Approximately 830 KVA
- Power (Consumption Factor): Approximately 70% during production
- Cooling Water Requirement: Approximately 41 m3/h at 10 °C inlet temperature
- Compressed Air: Approximately 9–11 Nm3/h
Dimensions:
- Length: 23,000 mm
- Width: 10,700 mm (including control cabinets)
- Height: 5,800 mm
See more
Archived catalogs
Blown Film Winder FAC II2 Pages
Film Winder for Cast Films4 Pages
Related Searches
- Extrusion line
- Thermoplastic extrusion line
- Twin screw extruder
- Single screw extruder
- Multilayer extrusion line
- PP extrusion line
- PP extruder
- PE extrusion line
- Compounding extruder
- PE extruder
- PVC extruder
- Flat-film extrusion line
- ABS extruder
- Compact extruder
- Blown film extrusion line
- PET extruder
- Extrusion line with water cooling
- Polystyrene extruder
- PC extruder
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.