Blown Film Lines Filmtec 1-1700

1 / 2 PagesView full catalog

Blown Film Lines Filmtec 1-1700

Product catalog summary

Technical Specifications:

Line Type: Mono-layer Blown Film Line without internal bubble cooling.
Resin Feeding: Gravimetric dosing with 3 components.
Extruder: Diameter 70–30 L/D, Hip/Reiloy barrel, water-cooled feeding zone, barrier screw.
Die Head: Stationary die head BK-F-0350 for die inserts 150–350 mm with dual flow air ring.
Guiding: 8-segment sizing basket.
Collapsing Frame/Haul Off: Aluminium rollers or combination with wooden slats, reversing haul-off with horizontal turner bars.
Winding: 2-station winder SFA with contact winding, lay-on pressure control, DC drives.

Design Capabilities:

Suitable for PE-LD, PE-LLD, and blends, with an option for PE-HD.
Film width up to 1600 mm.
Film thickness range from 0.020 to 0.150 mm.
Maximum extrusion capacity of 240 kg/hr, depending on resin and product dimensions.
Product examples include packaging film, film for bags, and fine gauge films.

Consumption Data:

Power: Installed capacity approximately 350 kVA, with a consumption factor of about 70% during production.
Water: Approximately 3 m3/hr with a Delta T of 4°C, with heat exchangers an additional 5 m3/hr at Delta T of 4°C.
Compressed Air: Approximately 5 Nm3/h.

Dimensions:

Length: 14,000 mm
Width: 5,000 mm
Height: 10,000 mm

Contact Information:
REIFENHÄUSER GmbH & Co. KG Maschinenfabrik, Spicher Straße 46-48, D-53839 Troisdorf, Germany. Phone: +49 2241 481-0, Fax: +49 2241 408778, Email: [email protected], Website: www.reifenhauser.com

Blown Film Lines Filmtec 1-1700

Blown Film Lines Filmtec 1-1700

Archived catalogs