Blown Film Lines Filmtec 1-1700 IBC

1 / 2 PagesView full catalog

Blown Film Lines Filmtec 1-1700 IBC

Product catalog summary

Technical Specifications:

Line Type: Mono-layer Blown Film Line with internal bubble cooling.
Resin Feeding: Gravimetric dosing with 3 components.
Extruder: Diameter 80–30 L/D Hip/Reiloy barrel, water-cooled feeding zone, barrier screw.
Die Head: Stationary die head BK-F-0350 for die inserts 150–350 mm, dual flow air ring.
Guiding: 8-segment sizing basket.
Collapsing Frame/Haul Off: Aluminium rollers or combination with wooden slats, reversing haul-off with horizontal turner bars.
Winding: 2-station winder SFA II with contact winding, lay-on pressure control, AC servo drives, optional centre drive.

Design Capabilities:

Materials: PE-LD, PE-LLD, and blends, with an option for PE-HD.
Film Width: Up to 1600 mm.
Film Thickness: 0.020–0.150 mm.
Extrusion Capacity: Maximum 320 kg/hr, depending on resin and product dimensions.
Product Examples: Packaging film, film for bags, collation shrink, fine gauge films.

Consumption Data:

Power: Installed capacity approximately 500 kVA, consumption factor during production ~ 70%.
Water: Approximately 3 m3/hr with Delta T of 4°C; with heat exchanger, an additional 10 m3/hr with Delta T of 4°C.
Compressed Air: Approximately 10 Nm3/h.

Dimensions:

Length: 16,000 mm.
Width: 6,000 mm.
Height: 12,500 mm.

Manufacturer Information:
REIFENHÄUSER GmbH & Co. KG Maschinenfabrik, Spicher Straße 46-48, D-53839 Troisdorf, Germany. Phone: +49 2241 481-0, Fax: +49 2241 408778, Email: [email protected], Website: www.reifenhauser.com

Blown Film Lines Filmtec 1-1700 IBC

Blown Film Lines Filmtec 1-1700 IBC

Archived catalogs