Catalogs >
Reichhold >
Low Profile Tooling Resin POLYLITE® 33542-75

Low Profile Tooling Resin POLYLITE® 33542-75
2Pages

Catalog excerpts

Low Profile Tooling Resin POLYLITE® 33542-75 Updated February 2016 NEW LOW PROFILE TOOLING SYSTEM POLYLITE® 33542-75 DESCRIPTION: POLYLITE® 33542-75 is a pre-promoted, pre-filled, unsaturated polyester laminating resin suitable for the construction of GRP tools. APPLICATION: POLYLITE® 33542-75 is specifically designed for hand-lay-up and/or spray-up with: • Good wetting properties • Easy rolling • Fast wetting of the glass fibre • Low density resulting in less resin use and lighter tool constructions • Less settling • Easy mixing before use physical data in LIQUID STATE AT 23°C Properties The information herein is to help customers determine whether our products are suitable for their applications. Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our products before using them to satisfy themselves as to contents and suitability. We warrant that our products will meet our written specifications. Nothing herein shall constitute any other warranty express or implied, including any warranty of merchantability or fitness for a particular purpose, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all proven claims is replacement of our materials, and in no event shall we be liable for special, incidental, or consequential damages. +47 33448600 - P.O. Box 2061, 3201 Sandefjord, Norway - Klinestadmoen 9, 3241 Sandefjord, Norway - www.reichhold.com

Open the catalog to page 1

Construction laminate Skin Laminate Support frame Low Profile Tooling System Based on Gelcoat, Skin and Construction Laminate Step 1: Tooling Gelcoat NORPOL® GM 90000 H/S or GM 60014 H/S, a minimum of 600 microns (0.6mm) cured. The best result is achieved at temperatures between 20-23°C. Step 2: Skin laminate The same day or within 24 hours apply a minimum of 1 layer 225 g/m2 +1 layer 450g/m2 or 2 layers of 300 g/m2 powder mat (wet on wet) + POLYLITE® 410-900 with 1.5 % NORPOL® PEROXIDE 1. For improved surface use DION® IMPACT 9133-800 with 2% NORPOL® PEROXIDE 1. Step 3: Construction...

Open the catalog to page 2