Catalog excerpts
DION® IMPACT 9133 Premium Bisphenol A Vinyl Ester PRELIMINARY EDITION REICHHOLD is one of the world’s largest suppler of unsaturated polyester resins for composites and a leading supplier of coating resins for a wide variety of markets and applications. With its world headquarters in Durham, North Carolina, USA, and 20 manufacturing sites (17 operated by Reichhold) and 5 technology centres spread around the world, Reichhold has the widest global reach of any resin supplier today. For contact information to our sales offices and distributors in Europe please see under Composites on our website www.Reichhold.com. Reproduction of all or any part is prohibited except by permission of authorized Reichhold personnel. Copyright © 2014 by Reichhold, Inc. All rights reserved. 1025EN 02/2014.
Open the catalog to page 1DION® IMPACT 9133 DION IMPACT 9133 is a premium bisphenol A epoxy-based vinyl ester resin which has been designed to give additional benefits in comparison to standard bisphenol A epoxy-based vinyl ester resin: ® • Very low-foaming system curable with standard MEK peroxide • Improved heat deflection temperature (HDT) • Lower styrene content Belonging to the Impact family, DION® IMPACT 9133 is characterized by lighter colour, as well as an improved shelflife, well-balanced/high reactivity with good final cure and shorter de-moulding times. It is a very low foaming vinyl ester resin that also...
Open the catalog to page 2PHYSICAL DATA IN LIQUID STATE AT 23°C Moderate post-curing procedures, 8 h at 80°C, already give very good effects on the degree of cure and the mechanical performance of the DION® IMPACT 9133 resin and its laminates. The HDT reaches values of around 100°C, ie about 10 degrees higher than for standard vinyl ester resins, The retention of the mechanical properties of both resin and laminate made with DION® IMPACT 9133 at 80°C is significantly better than for standard vinyl ester resins. This allows the use of FRP structures made with DION® IMPACT 9133 at about 10 to 15°C higher design and...
Open the catalog to page 3TYPICAL GELTIMES DION® IMPACT 9133 is a high reactivity resin requiring in general only low levels of Cobalt for promotion. Mechanical properties and HDT may depend on the curing system chosen. The following curing systems are proposed for curing of DION® IMPACT 9133 when using MEK peroxides of type Butanox M50/Norpol® Peroxide 1 (M50/K1) and Butanox LPT/Norpol® Peroxide 11 (LPT/K11) and moderate laminate thicknesses. Post-curing is recommended. If post-curing may not be possible or thinner laminates need to be cured the cobalt and DMA content can be increased, to about 1.5% of 1% Co and...
Open the catalog to page 4TYPICAL GELTIMES DION® IMPACT 9133 is a high reactivity resin requiring in general only low levels of Cobalt for promotion. Mechanical properties and HDT may depend on the curing system chosen. The following curing systems are proposed for curing of DION® IMPACT 9133 when using MEK peroxides of type Butanox M50/Norpol® Peroxide 1 (M50/K1) and Butanox LPT/Norpol® Peroxide 11 (LPT/K11) and moderate laminate thicknesses. Post-curing is recommended. If post-curing may not be possible or thinner laminates need to be cured the cobalt and DMA content can be increased, to about 1.5% of 1% Co and...
Open the catalog to page 5PHYSICAL DATA IN LIQUID STATE AT 23°C Moderate post-curing procedures, 8 h at 80°C, already give very good effects on the degree of cure and the mechanical performance of the DION® IMPACT 9133 resin and its laminates. The HDT reaches values of around 100°C, ie about 10 degrees higher than for standard vinyl ester resins, The retention of the mechanical properties of both resin and laminate made with DION® IMPACT 9133 at 80°C is significantly better than for standard vinyl ester resins. This allows the use of FRP structures made with DION® IMPACT 9133 at about 10 to 15°C higher design and...
Open the catalog to page 6DION® IMPACT 9133 DION IMPACT 9133 is a premium bisphenol A epoxy-based vinyl ester resin which has been designed to give additional benefits in comparison to standard bisphenol A epoxy-based vinyl ester resin: ® • Very low-foaming system curable with standard MEK peroxide • Improved heat deflection temperature (HDT) • Lower styrene content Belonging to the Impact family, DION® IMPACT 9133 is characterized by lighter colour, as well as an improved shelflife, well-balanced/high reactivity with good final cure and shorter de-moulding times. It is a very low foaming vinyl ester resin that also...
Open the catalog to page 7DION® IMPACT 9133 Premium Bisphenol A Vinyl Ester PRELIMINARY EDITION REICHHOLD is one of the world’s largest suppler of unsaturated polyester resins for composites and a leading supplier of coating resins for a wide variety of markets and applications. With its world headquarters in Durham, North Carolina, USA, and 20 manufacturing sites (17 operated by Reichhold) and 5 technology centres spread around the world, Reichhold has the widest global reach of any resin supplier today. For contact information to our sales offices and distributors in Europe please see under Composites on our...
Open the catalog to page 8All Reichhold catalogs and technical brochures
-
UROTUF® F275-M-75
2 Pages
-
EPOTUF® 38-698
2 Pages
-
F600-W-40
2 Pages
-
UROTUF®
7 Pages
-
DION® IMPACT 9133
2 Pages
-
UROTUF® Water-borne Urethane
4 Pages
-
BioiPreferred® Guideline
2 Pages
-
NORPOL® ULTIMATE GELCOAT
2 Pages
-
NORPOL® SVX Gelcoat
2 Pages
-
NORPOL® SVG Gelcoats
3 Pages
-
NEW NORPOL® SRG GELCOAT
2 Pages
-
DION® Corrosion Guide
45 Pages
-
POLYLITE ® 3354225
3 Pages
-
EPOTUF® 38-698
2 Pages
-
Improved vinyl ester technology
21 Pages
-
UROTUF® F600-W-40
2 Pages
-
UROTUF® E300-W-40
2 Pages
-
Corrosion Guide
45 Pages
-
Coating Resins Catalog
35 Pages
-
BECKOSOL AQ®
12 Pages
-
AROFLINT® Flyer
2 Pages
-
Material Selection Guide
77 Pages
-
FRP Inspection Guide
36 Pages
-
Vacuum Foil Infusion
19 Pages
-
RTM Light
15 Pages
-
Pultrusion (Europe)
3 Pages
-
A Reichhold Company Overview
11 Pages
-
NORPOL® VBC Barriercoat
3 Pages
-
NORPOL® GI
3 Pages
-
NORPOL® CPG
4 Pages
-
Pultrusion (EMEA)
3 Pages
-
NORPOL® SVG Gelcoats
4 Pages
-
Fire Retardant (EMEA)
15 Pages
-
Bonding Paste (EMEA)
15 Pages
Archived catalogs
-
Vacuum Foil/ RTM Process (EMEA)
11 Pages
-
Tooling System (EMEA)
11 Pages
-
SMC/ BMC (EMEA)
3 Pages