Forms of delivery, ex warehouse — REGUPOL 1.50 Rolls Thickness: 17 mm, dimpled Length: 10,000 mm, special lengths available Stripping/Plates On request: Die-cutting, water-jet cutting, self-adhesive versions possible Technical Details Maximum static load bearing capacity 0.050 N/mm2 Rare, short term peak loads up to 0.080 N/mm2 0 N/mm2 Physical property Norm Result Comment Static modulus of elasticity Based on EN 826 0.1 - 0.2 N/mm2 Tangential modulus, see figure “Modulus of elasticity” Dynamic modulus of elasticity Based on DIN 53513 0.2 - 1.4 N/mm2 Depending on frequency, load and thickness, see figure “dynamic stiffness” Mechanical loss factor DIN 53513 0.18 Load-, amplitude- and frequency-dependent Compression set Based on 1.6 % Measured 30 minutes after decompression DIN EN ISO 1856 with 50% deformation / 23 °C after 72 hrs Tensile strength Based on 0.3 N/mm2 DIN EN ISO 1798 Elongation at break Based on 55 % DIN EN ISO 1798 Tear resistance Based on DIN ISO 34-1 2.1 N/mm Fire behaviour DIN 4102 B2 Normal flammability DIN EN 13501 E acceptable fire behaviour Sliding friction REGUPOL-laboratory 0.7 Steel (dry) Compression hardness Based on 50 kPa Compressive stress at 25 % deformation Rebound elasticity Based on 10 % dependent on thickness, Force reduction DIN EN 14904 73 % dependent on thickness, test specimen h = 51 mm Ozone resistance DIN EN ISO 17025 Cracking stage 0 Technical Data | REGUPOL vibration 300 | Release 06.04.2021 | www.regupol.com

Regupol vibration REGUPOL® vibration Load Ranges Maximum static load bearing capacity in N/mm² REGUPOL type designation Load Deflection Static load range Deflection [mm] Examination of deflection in accordance to DIN EN 826 between two stiff panels. Illustration based on the third loading. Velocity of loading and unloading 20 seconds. Tested at room temperature. Dimensions of test specimens 300 x 300 mm. Technical Data | REGUPOL vibration 300 | Release 06.04.2021 | www.regupol.com

Natural frequency [Hz] Illustration of the isolation efficiency of a single-degree-of-freedom system (SDOF system)on a rigid base with REGUPOLvibration 300. Parameter: power transmission (insertion loss) in dB, isolation factor in %. Natural Frequency Natural frequency [Hz] Naturalfruenzncy of a single-engree-of-freedom nystem (SDOS system) considering the dynamic stiffness of REGUPOL vibration 300 onarigid base. Dimensious of test specimens 300 x 300 mm. Technical Data | REGUPOL vibration 300 | Release 06.04.2021 | www.regupol.com

Change of mechanical loss factor [%] Change of dynamic stiffness [%] Difference in natural frequency [%] Amplitude [pm] Change of the dynamic stiffness due to changes in amplitudes. Average for 5 Hz, 10 Hz and 40 Hz excitation. Sinusoidal excitation at a constant mean load of 0.05 N/mm2, dimensions of the specimens 300 x 300 x 51 mm. Natural frequency of a single-degree-of-freedom system (SDOF system) on a rigid base. Amplitude [pm] Change of the mechanical loss factor due to changes in amplitudes. Sinusoidal excitation at a constant mean load of 0.05 N/mm2, dimensions of the specimens 300 x...

Pressure [N/mm²] Illustration of the dynamic modulus of elasticity for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 34 mm; static modulus of elasticity as a result of the tangent modulus of the spring characteristic. Tested in accordance with DIN 53513. Dynamic Stiffness Pressure [N/mm²] Illustration of the dynamic stiffness for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 34 mm; static stiffness as a result of the tangent m odulus of the spring characteristic....

Long-Term Creep Test Duration of load [h] Dimensions of specimens 300 x 300 x 51 mm Exclusion of Liability Technical services and offers based on these are subject to our General Terms and Conditions of sale, a copy of which can be found on our website www. berleburger.com. Special attention should be paid to paragraphs 4 and 5. In so far, please be advised as follows: Our expertise is the development and manufacturing of products. With our recommendation we can only assist you in selecting a product that is suitable for your demand. However, we cannot act as your architect or consulting expert....