The fastest tool clamping system in the world
The fastest tool clamping system in the world
The powRgrip® tool clamping system is presented as the fastest in the world, offering a simple and safe method to clamp tools in just 8 seconds by pressing a single button. It ensures high clamping force without heating up and maintains low runout even after 20,000 tool changes.
- Total system runout is ≤3 µm at 3 x D.
- Tools with shaft diameters from 0.2 to 25.4 mm can be clamped.
- Compatible with various materials and tool shank types, including carbide, HSS, cylindrical, WELDON, and Whistle notch.
- Extensive collet range for milling, reaming, drilling, and turning applications.
- Supports MQL, peripheral, or internal cooling.
- Available for multiple spindle interfaces such as REGO-FIX CAPTO, BT, SK, HSK, CAT, and more.
- In-house testing shows increased cutter tool life with the powRgrip® system compared to other systems like shrink-fit and hydro-chuck.
- Transferable torque is measured per shank diameter, indicating superior performance.
- Vibration measurements demonstrate lower amplitude with powRgrip® compared to standard shrink-fit holders.
For more details and to test the powRgrip® system free of charge, visit try.rego-fix.ch/toollife. The system is developed by REGO-FIX AG, based in Switzerland, with testing conducted by the Institute for Production and High-Performance Laser Technology at the Technical University of Vienna.
Catalog excerpts
The fastest tool clamping system in the world SIMPLE Tool is clamped in 8 seconds by pushing only one single button. SAFE No heat up - high clamping force. Total system runout TIR ≤3 µm at 3 x D. Excellent vibration dampening. The tool clamping system of today and the future. Maximum clamping force and low runout, even after 20,000 tool changes. Test powRgrip® free of charge! Get more information at try.rego-fix.ch/toollife
Open the catalog to page 1
Increased cutter tool life with the powRgrip® System Influence of tool runout on tool life / Source: In-house testing All tool shanks are clampable All kind of materials such as carbide or HSS as of cylindrical, WELDON or Whistle notch can be clamped with powRgrip®. Tool life Extensive collet range Tools with shaft diameters from 0.2 up to 25.4 mm REGO-FIX ER system with Hi-Q® clamping nut and as well for turning applications. The possibilities of MQL, peripheral or internal cooling are given. Transferable torque of the powRgrip® System Measured transferable torque per shank diameter / Source:...
Open the catalog to page 2All REGO-FIX catalogs and technical brochures
ER System166 Pages
powRgrip System90 Pages
micRun System58 Pages
Product novelties 20182 Pages
TORCO-BLOCK4 Pages
reCool® for lathes24 Pages
