Experience the extensive powRgrip® offering
89Pages

{{requestButtons}}

Catalog excerpts

Experience the extensive powRgrip® offering - 1

Experience the extensive powRgrip® offering Clamping units Cylindrical Pullout protection secuRgrip® colletholders Micro machining Long shanks Short shanks Turning collets Pullout protection secuRgrip® Collets for tapping PG-TAP  powRgrip® Clamping units

Open the catalog to page 1
Experience the extensive powRgrip® offering - 2

Discover powRgrip® Concentricity and optimum vibration dampening saves time and money Ambitious toolholding  Thanks to the unique clamping method of PGU, the clamped tools can be used in production quickly and safely. The advanced technology not only increases the work safety for the user, but also reflects our ecological thinking, which manifests itself – among other things – through low energy consumption during the clamping process. The clamping unit clamps the powRgrip® collet into the toolholder with a force of up to 90 kN. The pressure fit provided between the collet and toolholder...

Open the catalog to page 2
Experience the extensive powRgrip® offering - 3

Automatic clamping unit PGU Toolholding made fast, safe and easy The clamping unit PGU 9500 has been awarded the Red Dot design award for industrial design, highlighting the good usability and outstanding design of the machine. Clamp the tool safely and securely by pushing just one button. The clamping will take 8 seconds, without the use of heat. Clamp tools with maximum clamping force and best runout in the powRgrip® collet and toolholder. Smart System – no setting of parameters required. Clamping pressure is controlled by the insertion of the respective clamping insert (APG). There are...

Open the catalog to page 3
Experience the extensive powRgrip® offering - 4

Automatic clamping unit PGU 9500 Clamping inserts APGs for PGU 9500 Clamping inserts APG not included Clamping inserts APG (incl. TKCP and CPS) APG 906* *APG 906 is only suited for PGU 9006 and 9500. All other APGs can be used for PGU 9000 / 9006 / 9500

Open the catalog to page 4
Experience the extensive powRgrip® offering - 5

Clamping inserts APCs for PGC 2506 Manual clamping unit PGC 2506 Includes clamping unit, hand pump and stand. APC not included Clamping inserts APC (incl. TKCP and CPS) APC 6 *APC 6 is only suited for SET PGC 2506. All other APCs can be used for SET PGC 2506 and 2510

Open the catalog to page 5
Experience the extensive powRgrip® offering - 6

Cylindrical Pullout protection secuRgrip® colletholders

Open the catalog to page 6
Experience the extensive powRgrip® offering - 7

Chip hole Taper accuracy powRgrip® toolholders in Swiss quality REGO-PLUS available Chip hole Taper accuracy

Open the catalog to page 7
Experience the extensive powRgrip® offering - 8

HSK toolholders Designed for rotating applications, all our HSK toolholders are suited for high-speed applications where consistent performance is key. Features and benefits Total system runout TIR ≤ 3 μm @ 3 x D Our holistic system consists of a powRgrip® toolholder and collet. All components together ensure best runout and accuracy. Toolholder runout TIR ≤ 1 μm Measured from collet cavity to outer taper. Balancing specifications Achieve high clamping force and high transferable torque. Hi-Q® balancing system REGO-FIX HSK / PG toolholders are balanced to G 2.5 @ 25,000 rpm /<1gmm. Type H...

Open the catalog to page 8
Experience the extensive powRgrip® offering - 9

HSK-A toolholders

Open the catalog to page 9
Experience the extensive powRgrip® offering - 10

HSK-A toolholders

Open the catalog to page 10
Experience the extensive powRgrip® offering - 11

HSK-A toolholders

Open the catalog to page 11
Experience the extensive powRgrip® offering - 12

HSK-E toolholders

Open the catalog to page 12
Experience the extensive powRgrip® offering - 13

HSK-F toolholders

Open the catalog to page 13
Experience the extensive powRgrip® offering - 14

SK steep taper toolholders Universally suitable for different machining applications. Features and benefits Total system runout TIR ≤ 3 μm @ 3 x D Balancing specifications Our holistic system consists of a powRgrip® toolholder and collet. All components together ensure best runout and accuracy. Toolholder runout TIR ≤ 1 μm Measured from collet cavity to outer taper. Taper accuracy AT3 Better spindle-to-holder fit and accuracy. Surface finish max. Ra 0.25 Achieve high clamping force and high transferable torque. Balancing Total system runout TIR ≤ 10 μm 100 % balanced to G 2.5 @ 5,000 rpm....

Open the catalog to page 14
Experience the extensive powRgrip® offering - 18

REGO-PLUS Certified  The BIG PLUS SYSTEM – licensed by BIG Daishowa – is manufactured at REGO-FIX in Switzerland under license according to BIG PLUS specifications. Higher colletholder stiffness due to taper (AT1) and face contact. Improved machining accuracy and better surface finish. Features and benefits Total system runout TIR ≤ 0.0001” (3 μm) Our holistic system consists of a powRgrip® toolholder and collet. All components together ensure best runout and accuracy. Surface finish max. Ra 0.25 Achieve high clamping force and high transferable torque. Balancing 100 % balanced to G 2.5 @...

Open the catalog to page 18
Experience the extensive powRgrip® offering - 19

*Balancing rings  H: Ready to accept balancing rings

Open the catalog to page 19
Experience the extensive powRgrip® offering - 20

BT steep taper toolholders Universally suitable for different machining applications, the BT interface toolholders cater to different machining needs. Balancing specifications Total system runout TIR ≤ 3 μm @ 3 x D Our holistic system consists of a powRgrip® toolholder and collet. All components together ensure best runout and accuracy. Toolholder runout TIR ≤ 1 μm Measured from collet cavity to outer taper. Taper accuracy AT3 Better spindle-to-holder fit and accuracy. Surface finish max. Ra 0.25 Achieve high clamping force and high transferable torque. Balancing 100 % balanced to G 2.5 @...

Open the catalog to page 20
Experience the extensive powRgrip® offering - 24

BT-OM toolholders *Balancing rings  H: Ready to accept balancing rings BT-OM / PG toolholders without drive slots Applications This special toolholder without drive slots is designed for use on HAAS and HURCO CNC-machining centers, for High Speed Cutting (HSC) and High Performance Cutting (HPC). Use up to the max. power limit of the processing machine. The anti-vibration characteristics of the BT-OM /  PG toolholder reduce the wear of spindle and tool. Balancing REGO-FIX BT-OM / PG toolholders are balanced to G 2.5 @ 30,000 rpm / <1gmm. Type H toolholders are compatible with Hi-Q® balancing...

Open the catalog to page 24
Experience the extensive powRgrip® offering - 26

REGO-PLUS REGO-FIX BT+ dual contact toolholders doublecontact REGO-PLUS Certified  The BIG PLUS SYSTEM – licensed by BIG Daishowa – is manufactured at REGO-FIX in Switzerland under license according to BIG PLUS specifications. Higher toolholder stiffness due to taper (AT1) and face contact. Total system runout TIR ≤ 3 μm at 3 x D. Features and benefits Total system runout TIR ≤ 0.0001” (3 μm) Our holistic system consists of a powRgrip® toolholder and collet. All components together ensure best runout and accuracy. Balancing specifications Achieve high clamping force and high transferable...

Open the catalog to page 26

All REGO-FIX Tool Corporation catalogs and technical brochures

  1. powRgrip

    89 Pages

  2. ER catalog

    147 Pages

  3. Measuring

    4 Pages