Cryogen: Coolant at the right spot.

Product catalog summary

Specifications:
Total system runout is specified as TIR ≤3 µm at 3 x D, ensuring precision. The system maintains maximum clamping force and low runout even after 20,000 tool changes, with excellent vibration dampening. Tools are ready for use in 8 seconds with the PGU 9500 system.

Cooling Technology:
The CRYO-powRgrip® system utilizes CO2 to cool the cutting edge safely and cleanly, optimizing dosage for effective cooling. This system eliminates contamination, negating the need for additional cleaning of workpieces, which is particularly beneficial in industries like medical manufacturing.

Toolholder Systems:
The ER toolholder is a typical clamping system but may experience icing due to CO2's gaseous state. In contrast, the PG-CRYO toolholder directs the cooling medium to the cutting edge, where CO2 expands and provides efficient, clean chipping.

Benefits of CRYO-powRgrip®:

Perfect guidance of the cooling medium to the cutting edge.
Increased tool life and productivity due to higher cutting parameters.
Improved surface finishing.
No disposal of cooling fluid is necessary.
No need for workpiece cleaning.
100% recycling of chips.

Additional Information:
REGO-FIX AG is located at Obermattweg 60, 4456 Tenniken, Switzerland. More information can be found at www.rego-fix.com.

Catalog excerpts

Cryogen: Coolant at the right spot. COOL CO2 cools the cutting edge in a safe and clean way, thanks to powRgrip® with an optimum dosage. CLEAN No contamination at all, therefore no necessity of additional cleaning of the workpiece afterwards. Total system runout TIR ≤3 µm at 3 x D. Excellent vibration dampening. CRYO-powRgrip® PG-CRYO collets offer the latest tool cooling technology, for a clean chipping of workpieces (i.e. Medical industries). CO2 sealed: Designed by REGO-FIX. Maximum clamping force and low runout, even after 20'000 tool changes. Tool ready for use in 8 seconds with PGU 9500.

Open the catalog to page 1

The major difference of tool holding systems Solution: Reducing of the condensation space ER - Toolholder Typical tool clamping system, with the risk of icing of the holder, due to the gaseous state behaviour of CO2. PG-CRYO - Toolholder The cooling medium will be directly led to the cutting edge through the cutting tool. The CO2 expands at the cutting edge and the ice snow provides an efficient and clean chipping. State of aggregation diagram Benefits of CRYO-powRgrip® • Perfect guidance of the cooling medium to the cutting edge • Tool life increase • Productivity increase, due to higher cutting...

Open the catalog to page 2

Cryogen: Coolant at the right spot.

Cryogen: Coolant at the right spot.

Catalog excerpts

All REGO-FIX Tool Corporation catalogs and technical brochures