adapters
6Pages

Extended Type Hose Couplings for Vapor and Liquid Service Designed especially for liquid filling and vapor equalization of LPGas and anhydrous ammonia. The limited travel of the handle on the tailpiece minimizes spin-off, encouraging cautious removal to properly bleed off trapped product to assure closure of the filler valve and hose end valve. The ACME threads are machined on a rugged steel insert which is permanently cast in the aluminum handle, providing for durability under repeated use. Coupling Connection (F. ACME) Approx. Length * Includes 7199-33 adapter, shipped loose. ** Includes A7575L5-1 adapter, shipped loose. Short Type Hose Couplings for Vapor and Liquid Service Style C For Vapor Equalizing Style A For Liquid Filling Style B For Liquid Filling Part Number Brass Nut & Steel Nipple Coupling Connection (F. ACME) Style D For Vapor Equalizing Overall Length Adapters, Connectors, & Fittings

ACME Check Connectors for Lift Trucks UL ® These brass connectors are especially designed to join the carburetor fuel line to the service valve on lift truck cylinders. Sturdy, long lasting ACME threads allow quick, hand-tight assembly that provides for quick and simple cylinder replacement. Back checks automatically close in each connector when disconnected. The 7141M couples directly to the service valve. An integral O-ring is designed to seal before the internal check opens, aiding in product loss prevention. A gasket at the ACME thread is a secondary seal when the connectors are...

ACME Plugs Part Number Specifically designed to withstand the everyday abuse given hose end valves on delivery trucks and hose end couplings on risers in bulk plants. These rugged plugs protect the coupling tip as well as prevent the entrance of dirt, dust, snow and rain. They also prevent possible gas contamination from these same sources. The heavily ribbed outer surface permits hand-tight make-up. Chain & Ring Fits Pipe Size Up To: ¾” 1¼” Not Applicable 1¼” 2” POL Plugs Highly recommended for installation in LP-Gas cylinder valve POL outlets whenever the service line is disconnected or...

ACME Adapters For Spare Gasket Order Part No. Gasket (Furnished with adapter) A2697-20R Gasket (Furnished with adapter) For Spare Gasket Order Part No. Material Brass For Spare Gasket Order Part No. Gasket (Furnished with adapter) Part Number For Spare Gasket Order Part No. (Recommended for securing hose-end valve when not in use). Adapters, Connectors, & Fittings

Male POL Swivel Adapters D 970S (CGA 510) POL Soft Nose POL w/60 DMS Orifice (CGA 510) POL 970AXS Soft Nose POL w/Excess Flow 3199W (CGA 510) POL Heavy Duty Hard Nose POL w/Excess Flow D A A (CGA 510) POL 970AX Hard Nose POL w/Excess Flow Part Number 970JR Hard Nose POL w/Hose Barb Connection Vapor at 100 PSIG Inlet (SCFH) 970AW (CGA 510) POL 970HT Soft Nose POL w/Handwheel Note: All nipples incorporate wrench hex section. Adapters, Connectors, & Fittings

Male POL x Male NPT and SAE Flare Ordering Information Ordering Information Part Number 2906A 2906G Part Number Female POL x Female NPT and Female POL Ordering Information Ordering Information Part Number Female Inverted Flare Ordering Information Part Number Ordering Information Ordering Information Material Female Inverted Flare x Male NPT Pressure Gauge Adapter For use with fuel gases (LP-Gas, 1⁄4” Acetylene). Part Number Miscellaneous Adapters Hose Adapter Part Number Material 1328 1331 1332 Adapters, Connectors, & Fittings 83