Application Designed for installation in liquid transfer lines at LP-Gas or Anhydrous Ammonia bulk plants to provide for quick shut-off of liquid or vapor flow in the event of an accidental pull-away, line break, or hose rupture. Features • Fusible Element is located in the thermal fuse assembly which acts at the latch open and close trigger. When exposed to fire, the element melts at 212° F allowing the shaft to return to the closed position. • Valve can be opened by use of operating lever, if a pneumatic actuator is used it will open with the actuator. • Valve can be closed by remote cable or pneumatic actuator. • Valve can be closed by simply pushing the operating lever down, it is not necessary to trip the close trigger. • Seat Disc is retained by a metal seat to minimize leakage in case of direct fire impingement. • Quick closing regardless if the pump is running or not. Sturdy Rugged Construction • Will withstand hydraulic shock of sudden closings, piping strains, and temperature variations. • Valve has only two moving parts, stem and close/thermal trigger. • A6016 is UL listed for use in LP-Gas as an emergency and operating shut-off valve. • Stem seals are spring loaded for leak free performance at low temperatures/pressures. 100 RegO Dr. Elon, NC 27244 USA www.regoproducts.com +1 (336) 44

Application Designed for installation in liquid or vapor transfer lines at LP-Gas or Anhydrous Ammonia bulk plants to provide for quick shut-off of liquid or vapor flow in the event of an accidental pull-away, line break, or hose rupture. Features Meets NFPA 58 and UL requirements • Fusible Element is located in the thermal fuse assembly, which acts at the latch open and close trigger. When exposed to fire, the element melts at 212 degrees F. allowing the shaft to return to the closed position. • Valve can be opened by use of operating lever. If a pneumatic actuator is used it will open with...

Application Designed for installation in liquid transfer lines at LP-Gas or Anhydrous Ammonia bulk plants to provide for quick shut-off of liquid or vapor flow in the event of an accidental pull-away, line break, or hose rupture. Features • Fusible Element is located in the thermal fuse assembly which acts at the latch open and close trigger. When exposed to fire, the element melts at 212° F allowing the shaft to return to the closed position. • Valve can be opened by use of operating lever, if a pneumatic actuator is used it will open with the actuator. • Valve can be closed by remote cable...

REGO 10 YEAR WARRANTY Application RegO Emergency Shut-Off Valves modified for remote pneumatic shutdown operation retain all the operating features of the standard valves. Once equipped with pneumatic cylinders and then pressurized, the pneumatic cylinder piston rod disengages from a striker plate, allowing the ESV to be manually opened and the striker plate to act as a latch and hold the valve open. Release of the control system pressure for any reason closes the ESV for fail-safe operation. Features Convenience • Closes the liquid and vapor ESV from a convenient remote location. • Independent...