TG-IH3/...Immersion sensor with housing t*J ✓ Sealed housing with IP65 ✓ Easy access to connection ✓ Replaceable cable gland Immersion sensor for temperature measurement in heating- or cooling applications. Available in different lengths. The immersion sensor measures the temperature in water pipes. It can be used for a wide range of applications, since there are models with different sensor elements and different insertion lengths. Needs to be installed in a well. The immersion sensor is suitable for all environments. A well is not delivered with the product. The user needs to mount a well on the pipe where temperature are wished to be measured, and then assemble the sensor in the well and secure the sensor with the locking screw. The terminal block for connecting the analog input to a controller is located under the cover. The cover is easily removed from the base with a twist. The sensor is designed so that the seal remains in the cover at all times and the cable gland is replaceable. HEAD OFFICE SWEDEN E-mail: [email protected]

Technical data HEAD OFFICE SWEDEN E-mail: [email protected]

L1 = 108, for 90 mm insertion length L2 = 98, for 90 mm insertion length All documentation can be downloaded from www.regincontrols.com. HEAD OFFICE SWEDEN E-mail: [email protected]