Regio RCX series are controllers with built-in sensors and an RS485 communication port. Controllers in different rooms and zones can be connected to a field bus enabling communication with a central SCADA system, via RS485 (EXOline, BACnet, or Modbus). They can also be used as stand-alone controllers for control of heating and cooling in a single zone or room. The stand-alone Regio controllers can be configured for a specific application via the Regin:GO app (in most cases). ✓ Elegant and slim design, which provides the ability to seamlessly install in design-critical environments ✓ Display showing relevant information and which enables visibility on a distance. Easy to keep clean ✓ Built-in sensors, which measure all relevant data in the same casing. Such as, temperature, humidity, CO2, VOC, and PIR ✓ Flexible application, where you can configure almost every possible room application, without programming knowledge ✓ Easy configuration, with wireless communication using the Regin:GO app ✓ Removable terminal, which simplifies troubleshooting ✓ Back plate with terminals allows installation without electronics in an unclean environment The Regio RCX controllers have a discrete design and are easy to use with an intuitive graphical LED matrix front and stylized touch buttons. They are suitable in buildings where you want optimal comfort and low energy consumption, for example offices, schools, shopping centres, airports, hotels and hospitals. HEAD OFFICE SWEDEN Phone: +46 31 720 02 00 Web: www.regincontrols.com E-mail: [email protected]

Table 1 Button and LED descriptions for Regio RCX controllers with a display. Function The controller mode function enables the controller to support control of various room HVAC systems, that is, different combinations of heating, cooling, and variable air volume (VAV) devices that are part of a room. In a room, the Regio RCX controller can measure and detect the following, depending on model: ✓ Relative humidity level ✓ If a window is open by the help of external sensors In a room, with the help of an HVAC system, the Regio RCX controller can control, for example: ✓ Temperature by activating...

The Regin:GO app can be downloaded from App store (iPhone and iPad) or Google play (Android). The modular design with a separate bottom plate for wiring makes the whole Regio RCX series easy to install and commission. The controllers are mounted directly on the wall or in a wall box. The Regio RCX controller consists of the main part (article number RCX-T[H,C,V,P]-[D]) and the wall mount RCX-B[L,M]. For complete function both a wall mount and a main part is needed. The wall mount is selected from the mounting. The RCX-BM is selected when mounted directly on the wall, and the RCX-BL is selected...

Supply voltage 1.0.5 K is valid if current on UO1 and UO2 is lower than 1.5 A, for currents between 1.5 A and 2 A the accuracy is 0.6 K. HEAD OFFICE SWEDEN Phone: +46 31 720 02 00 Web: www.regincontrols.com E-mail: [email protected]

HEAD OFFICE SWEDEN Phone: +46 31 720 02 00 Web: www.regincontrols.com E-mail: [email protected]

Table 2 Controller models Note! The wall mount assemblies are sold separately. HEAD OFFICE SWEDEN Phone: +46 31 720 02 00 Web: www.regincontrols.com E-mail: [email protected]

ACDC — Fig 2 general wiring example All documentation can be downloaded from www.regincontrols.com. HEAD OFFICE SWEDEN Regio RCXseries Phone: +46 31 720 02 00 Web: www.regmcontrols.com E-mail: [email protected]