RFID safety switches Short form

R-Safe RFID Next generation The application of R-Safe RFID sensors can be extremely wide thanks to the compact and versatile design. The best in cost-effectiveness Contactless, wear-free RFID technology enables a longer life cycle of the product. Status LEDs and diagnostic output allow the status of the sensors to be checked in real time. R-Safe sensors can be used as stand-alone or in serial connection. The best for series connections The RFID technology used enables PL e/SIL 3 security level to be achieved even when sensors are connected in series. Depending on the model, R-Safe RFID allows:...

Outstanding technical specifications Three different coding levels Generic coding The actuator is free and not specifically assigned to the sensor (one actuator can work with multiple generic sensors) Teach-in coding (Plus model only) The actuator is programmed via teach-in and permanently assigned to the sensor during set-up (the process can be repeated if necessary) Unique coding The actuator is permanently assigned to the sensor during manufacturing (it cannot be replaced with another actuator) Three models for all application needs Basic models (5-pole) Automatic restart Pro models (8-pole)...

Technical characteristics Ordering information Combo¹ (Sensor + Actuator) RRFID PLUS RRFID BASIC Electrical specifi cations Supply voltage Power consumption Switching current safety output Switching current status output Safety outputs Safety inputs Status output Restart Technical data C Combo S Small T Teach-in coding U Unique coding G Generic coding M12 connector Pigtail Cable 1 m Cable 3 m Cable 5 m Cable 10 m Sensor RRFID PLUS RRFID BASIC S Sensor S Small T Teach-in coding (PRO and PLUS only) M12 connector Pigtail Cable 1 m Cable 3 m Cable 5 m Cable 10 m Actuator RRFID Operating characteristics...

Quality, reliability and an extensive range Series connection with maximum safety Up to 16 R-Safe sensors can be connected in series Splitter connectors to simplify and speed-up wiring Up to Performance level PL e Connection to Mosaic* or any PLC or safety interface *M1S and M1S COM only In Plus models, it is possible to serialise the status signal of each sensor. The series status signal contains the individual status of each sensor of the series. In Pro models it is possible to read the status signal of each sensor. To use the status signal of a sensor connected in series, the CRY12 - A splitter...

Basic models Plus models Function 24 VDC Safety output 1 0 VDC Safety output 2 Status Function 24 VDC OSSD input 1 for series connection 0 VDC Safety output OSSD 1 Status Input s OSSD 2 for series connection Safety output OSSD 2 EDM Input Function 24 VDC OSSD input 1 for series connection 0 VDC Safety output OSSD 1 Status Input s OSSD 2 for series connection Safety output OSSD 2 EDM Input, Restart, Serial Ideal also in the most demanding applications Unique mechanical characteristics allow protection against cleaning agents and washdown processes, a typical requirement of the food industry. Resistant...

More than 60 years of quality and innovation Founded in Turin, Italy in 1959, ReeR distinguished itself for its strong commitment to innovation and technology. A steady growth throughout the years allowed ReeR to become a point of reference in the safety automation industry at a worldwide level. The Safety Division is in fact today a world leader in the development and manufacturing of safety optoelectronic sensors and controllers. ReeR is ISO 9001, ISO 14001 and ISO 45001 certified. ReeR SpA Via Carcano, 32 10153 Torino, Italy T +39 011 248 2215 F +39 011 859 867 reersafety.com | [email protected]...