Technical Summary of Standard Series 2B25 Internal Gear

This document provides detailed specifications for the Standard Series 2B25 internal gear, including dimensional parameters, weight, and mechanical features.

1. Specifications and Dimensions

• Weight: 245 kg
• Outer Diameter (Dış oÇap): 1200 mm
• Outer Ring Outer Diameter (Dış oRingo Dış oÇap): 1104 mm
• Outer Ring Invoice Diameter (Dış oRingo Fatura oÇapı): 1100 mm
• Outer Ring Inner Diameter (Dış oRingo İç oÇap): 1010 mm
• Inner Ring Outer Diameter (İç oRingo Dış oÇap): 963.5 mm
• Inner Ring Invoice Diameter (İç oRingo Fatura oÇapı): 1102 mm
• Inner Ring Inner Diameter (İç oRingo İç oÇap): 1160 mm
• Inner Diameter (İç oÇap): 1040 mm
• Ball Track Diameter (Bilyao Ekseni): 21 mm
• External Bolt Circle Diameter (Dış oRingo Deliko Ekseni): 21 mm
• Internal Bolt Circle Diameter (İç oRingo Deliko Ekseni): Not specified
• External Hole Diameter (Dış oRingo Deliko Çapı): 36 mm
• Internal Hole Diameter (İç oRingo Deliko Çapı): 36 mm
• Thread Depth (Klavozo Derinliği): 96 mm
• Number of External Bolt Holes (Dış oRingo Deliko Adedi): 96
• Number of Internal Bolt Holes (İç oRingo Deliko Adedi): 110
• Outer Ring Thickness (Dış oRingo Kalınlık): 10 mm
• Inner Ring Thickness (İç oRingo Kalınlık): 98 mm
• Overall Height (Toplam Kalınlık): Not explicitly stated
• Module (Modül): Not explicitly stated
• Number of Teeth (Dişo Sayısı): Not explicitly stated

2. Observations and Notes

• The document appears to be a technical data sheet for a specific internal gear model (2B25 series).
• Dimensions are given primarily in millimeters and weight in kilograms.
• Some parameters such as module and number of teeth are mentioned but not quantified in the provided data.
• The data includes detailed measurements for outer and inner rings, bolt hole counts and diameters, and thread depths, which are critical for assembly and compatibility.

3. Recommendations and Usage

• Ensure compatibility of bolt hole patterns and diameters when integrating this gear into assemblies.
• Verify the thickness and diameter parameters to match mechanical design requirements.
• Use the weight and dimensional data for load calculations and mechanical stress analysis.

Note: The original document contains tabular data with technical terms in Turkish and some abbreviations. The summary focuses on clarifying and structuring the key technical parameters for practical engineering use.