Technical Data Sheet No: 52 Reece Safety Products Ltd Unit 3 Gatehead Business Park, Delph New Road, Delph, Lancashire, OL3 5DE Tel: 01457 871148 Fax: 01457 878043 Email: [email protected] Product information and assembly instructions - Subject: Socket Lockout L0001 / L0002 / L0003 / L0004 / L0005 / L0006 / L0007 / L0008 User Instructions Pin and Sleeve Surface Mount or Trailing Socket lockout Device: 1 The lockout device has no internal parts and comprises of one single moulded part. 3 Ensure the device is fully inserted into the socket lid is positioned correctly on top of the device fixing position. 5 Lock HASP in position so it cannot be removed without authorisation.Check device cannot be removed. 2 Insert the device fully into the socket ensuring correct alignment. 4 Use a HASP to clamp around the socket and the socket lid hinge and through the device fixing position. 6 A tag should also be used to identify When and who locked out the socket. ·Check the lockout device is secured in the socket and cannot be remove. ·This lockout device can be fixed in place by a number of methods, ensure to tag also. ·HASP and Lock / Cable Tie / All-purpose cable lockout ·If lockout device is damaged do not use. ·If socket lid and or hinge is damaged, do not use lockout device. © Reece Safety Products