*mydirectindustry

Catalogs
Reece Safety Products
ELE09 Switchboard Matting

ELE09 Switchboard Matting

Product catalog summary

Product and Company Identification: The document pertains to T1C2 x 1/4” x 36” electrically-insulating switchboard matting, supplied by Reece Safety Products Ltd, located in Elland, West Yorkshire.

Composition: The matting is made from a proprietary SBR/NR-based recipe with a polyester fabric insert.

Hazards Identification: The matting is stable under normal conditions but can soften, melt, and combust above 212°F, releasing pungent smoke and fumes. Exposure to burned material can cause harmful effects such as nausea, unconsciousness, and irritation.

First Aid Measures: In case of ingestion, provide fluids and seek medical attention. For skin contact, flush with water and seek help. Inhalation and eye contact require medical assistance after flushing with water.

Fire Fighting Measures: Use water, CO2, or sand to extinguish fires involving the matting.

Handling and Storage: Store in a cool, dry place, avoiding temperature extremes and keeping the matting clean.

Physical and Chemical Properties: The matting is solid black rubber with a specific gravity of 1.47. It is stable but should be kept away from petroleum products and strong solvents.

Ecological Information: The matting should be recycled with other rubber products like tires.

Disposal Considerations: Dispose of at an EPA-approved facility for rubber products.

Transport Information: The matting is not classified as hazardous material and does not require special transport conditions.

Regulatory Information: The matting is non-toxic and complies with ASTM D-178-01 standards, which exclude PVC or plastic due to their brittleness and slipperiness.

Product Data: The matting is available in four voltage grades, with the standard stock being 6.32mm thick and 915mm wide, and can be manufactured up to 1220mm wide.

Catalog excerpts

Type I Matting Page 1 of 4 MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION Product Identification: T1C2 x 1/4” x 36” electrically-insulating switchboard matting Formula: PROPRIETARY Product ID Number: T1/C2 SUPPLIED BY: Reece Safety Products Ltd Unit B9, Lowfields Close, Lowfields Business Park, Elland, West Yorkshire HX5 9DX SBR/NR-based proprietary recipe with polyester fabric insert. 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: Temperature range: -65°F, +212°F. Rubber will soften and melt above 212°F. May combust. Smoke and fumes pungent and will cause injury if inhaled. Effects from exposure under normal conditions: None. Effects from exposure if burned: INGESTION: Harmful if swallowed. SKIN CONTACT: Will cause irritation. INHALATION: Nausea, possible unconsciousness. EYE CONTACT: Stinging and/or burning MEDICAL CONDITIONS AGGRAVATED: Any skin lesion or breathing difficulties OTHER: No other information at this time. 4. FIRST AID MEASURES INGESTION: Fluids; seek medical attention. SKIN CONTACT: Flush burned area with water, seek medical help INHALATION: Seek medical help EYE CONTACT: Flush eyes with water; seek medical help © Reece Safety Products Ltd

Open the catalog to page 1

Extinguish with water, CO2 or sand. 7. HANDLING AND STORAGE PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in cool, dry location. Avoid temperature extremes. Keep clean. 9. PHYSICAL AND CHEMICAL PROPERTIES BOILING POINT: N/A VAPOR PRESSURE: N/A VAPOR DENSITY: N/A FLASH POINT: N/A MELTING POINT / FREEZE POINT: -65°F +212°F PHYSICAL STATE: Solid Rubber matting ODOR: N/A COLOR: Black ODOR THRESHOLD: N/A % VOLATILE BY VOLUME: N/A SPECIFIC GRAVITY (WATER=1): 1.47 ACID/ALKALINITY: N/A PH: N/A 10. STABILITY AND REACTIVITY STABILITY: STABLE HAZARDOUS POLYMERIZATION: N/A HAZARDOUS THERMAL DECOMPOSITION/COMBUSTION...

Open the catalog to page 2

11. ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION: Should be recycled with other rubber products i.e., tires. 12. DISPOSAL CONSIDERATIONS DISPOSAL METHOD: Remove to EPA-approved facility for disposal of tires and other rubber products. Not hazardous material. Common carrier acceptable; no hazmat suits required. 14. REGULATORY INFORMATION TSCA STATUS: N/A - Non-toxic material NEW JERSEY RIGHT TO KNOW: N/A PENNSYLVANIA RIGHT TO KNOW: N/A NFPA: Chpt. 11-1 requires insulating mats be "maintained in safe working condition” 15. OTHER INFORMATION Information presented herein has been compiled...

Open the catalog to page 3

Open the catalog to page 4

All Reece Safety Products catalogs and technical brochures

Archived catalogs

The safety Lockout - Tagout catalogue
68 Pages