Catalogs >
Red Valve >
Series 48W

Series 48W
1Pages

Catalog excerpts

Pressure Sensor ► No wetted metal parts ► Non-clogging, protects instrumentation ► Body available in Carbon or Stainless Steel ► Sleeve available in Pure Gum Rubber, Neoprene, Hypalon®, Chlorobutyl, Buna-N, The Series 48W pressure sensor isolates and protects instru- mentation. The full-port design eliminates clogging, ensuring accurate pressure measurement under the most difficult con- ditions. The elastomer sleeve senses pressure 360 degrees around the inner circumference of the unit, overcoming prob- lems like plugging and fouling of traditional diaphragm seals. Combinations of elastomers and sensing fluids provide an operating range of -20° F to +400° F. Standard units are rated at 300 psi operating pressure and 450 psi surge pressure. All areas exposed to the process media are elastomer covered. Depending on the type of media being handled, elastomers can be specified to offer the best combination of chemical and abrasion resistance characteristics. The elastomer sleeve extends to the full face of the flange, eliminating the need for additional gaskets. Sensor lils inside mating Manges Unil has gaskets molded in. No additional gaskel requited 40 carbon steel pipe Series 48W Pressure Sensor Larger sizes available upon request. Red Valve Company, Inc. • 700 North Bell Avenue, Carnegie, PA 15106 • 412-279-0044 • Fax 412-279-7878 • www.redvalve.com

Open the catalog to page 1