Catalogs >
Red Lion Controls >
LPAX/MPAX

LPAX/MPAX
4Pages

Catalog excerpts

1 ! LARGE LED DISPLAY READABLE TO 70 FEET ! VARIOUS ANALOG INPUT MODULES; DC VOLTAGE AND CURRENT PROCESS SIGNALS TRUE RMS VOLTAGE AND CURRENT THERMOCOUPLE OR RTD STRAIN GAGE/BRIDGE ! ALARMS, ANALOG OUTPUT, AND COMMUNICATION ! CUSTOM UNITS LABEL WITH BACKLIGHT ! PROGRAMMABLE USER INPUTS ! PROGRAMMABLE FUNCTION KEYS ! UNIVERSAL AC/DC POWERED MODELS ! CRIMSON PROGRAMMING SOFTWARE ! NEMA 4/IP65 GENERAL DESCRIPTION The LPAX Display is a versatile display that can increase productivity by offering the plant floor or production area a large visual display of their current status. Whether your measurement is temperature, weight, or flow, the LPAX can satisfy your requirement. With the use of a units label and backlighting, the display can be tailored to show the actual engineering unit, which further enhances the display. This LPAX display accepts various analog inputs through the use of input modules (MPAX) which allow the unit to adapt to most any application. The MPAX Modules offer the same features as our highly successful PAX Series Panel Meters. Additional plug-in option cards can add alarms, analog output, and communication/bus capabilities, making the LPAX a truly Intelligent Panel Meter. SAFETY SUMMARY All safety regulations, local codes and instructions that appear in this and corresponding literature, or on equipment, must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. The protective conductor terminal is bonded to conductive parts of the equipment for safety purposes and must be connected to an external protective earthing system. SPECIFICATIONS Additional specifications, wiring, programming, and information for the individual MPAX models are contained in the corresponding standard PAX literature. This PAX literature is shipped with the ordered MPAX model. 1. DISPLAY: 1.5" (38 mm) Red LED 5-Digit: (-19999 to 99999) 2. POWER REQUIREMENTS: AC Modules: 85 to 250 VAC, 50/60 Hz, 18 VA DC Modules: 11 to 36 VDC or 24 VAC ±10%, 50/60 Hz, 14 W 3. INPUT: Accepts analog input modules, see .Selecting your display components.. 4. ANNUNCIATORS: LPAX0500: MAX, MIN, TOT, SP1, SP2, SP3, and SP4 Optional units label with backlight 5. KEYPAD: Five tactile membrane switches integrated into the front panel 6. CERTIFICATIONS AND COMPLIANCES: ULRecognized Component, File #E179259, UL61010A-1, CSA 22.2 No. 1010-1 Recognized to US and Canadian requirements under the Component Recognition Program of Underwriters Laboratories, Inc. UL Listed, File # E137808, UL508, CSA C22.2 No. 14-M95 LISTED by Und. Lab. Inc. to U.S. and Canadian safety standards Type 4 Enclosure rating (Face only), UL50 IECEE CB Scheme Test Certificate #US/8843/UL CB Scheme Test Report #04ME11209-20041018 Issued by Underwriters Laboratories, Inc. IEC 61010-1, EN 61010-1: Safety requirements for electrical equipment for measurement, control, and laboratory use, Part 1. IP65 Enclosure rating (Face only), IEC 529 ELECTROMAGNETIC COMPATIBILITY EMC specifications determined by the MPAX module. MODEL LPAX- 5 DIGIT LARGE PAX DISPLAY FOR ANALOG INPUTS DIMENSIONS In inches (mm) CAUTION: Risk of Danger. Read complete instructions prior to installation and operation of the unit. CAUTION: Risk of electric shock. PANEL CUT-OUT Bulletin No. LPAX-D Drawing No. LP0489 Released 12/05 Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net C US LISTED UL R IND. CONT. EQ. 51EB

Open the catalog to page 1

2 WARNING: Disconnect all power to the unit before installing Plug-in cards. Adding Option Cards The MPAX series meters can be fitted with up to three optional plug-in cards. However, only one card from each function type can be installed at a time. The function types include Setpoint Alarms (PAXCDS), Communications (PAXCDC), and Analog Output (PAXCDL). The cards can be installed initially or at a later date. Each optional plug-in card is shipped with installation and programming instructions. COMMUNICATION CARDS (PAXCDC) A variety of communication protocols are available for the PAX and...

Open the catalog to page 2

CAUTION: The MPAX main circuit board and the option cards contain static sensitive components. Before handling the module or the cards, discharge static charges from your body by touching a grounded bare metal object. Handle the module by the rear plastic cover only, and the option cards by the board edges. Dirt, oil or other contaminants that contact the circuit boards or components can adversely affect circuit operation. WARNING: Exposed line voltage exists on the MPAX main circuit board and the option cards. DO NOT apply power to the module OR load circuits until the module is properly...

Open the catalog to page 3

Once assembled, the LPAX and MPAX have all the same functions and capabilities of our PAX Series Intelligent Panel Meters. Therefore, you will find the appropriate PAX information packed with the MPAX Module. Simply follow the instructions to wire and program the display for your application. TROUBLESHOOTING For technical assistance, contact technical support. 2.0 INSTALLING THE DISPLAY 3.0 WIRING AND PROGRAMMING THE DISPLAY LPAX DISPLAY INSTALLATION The LPAX display is intended to be mounted into a panel or enclosure. The display is provided with a gasket to provide a water-tight seal. The...

Open the catalog to page 4