FEATURES Smooth passageways provide low friction radial water flow. Noryl® impeller-diffuser assemblies are encased in a corrosion resistant stainless steel shell. Pump and motor assembly are corrosion resistant. Efficient operation in either horizontal or vertical position. Impeller-diffuser assemblies are mounted on a 16-spline steel shaft for positive drive. A top bearing is provided in the cast iron discharge head for better shaft alignment. Replaceable journals protect shafts at bearings. Multi-stage construction permits modular or individual part replacement. Noryl®-staged components (impellers/diffusers) are permanently bonded by a reliable, foolproof, ultrasonic welding technique. Powered by CentriPro®. Motors are compatible with any competitive pump end of comparable horsepower. Big-Flo submersible pump/motor units are designed for industrial and commercial 4 inch pumping applications. Capacities up to 315 LPM. Four inch models available in horsepowers from 1 HP to 5 HP.

Red Jacket Water Products “DC” SERIES PUMPS - 90 LPM FOR 4“ DIAMETER WELLS FEET METERS • Pumps supplied with 50 mm (2”) bronze check valve at an additional price. RECOMMENDED OPERATING RANGE • 100 mm (4”) BIG-FLO pump ends have a 50 mm (2”) BSP threaded discharge outlet. • Maximum pump diameter is 96 mm (3¾”). • Minimum well size is 100 mm (4”). • Continuous operation outside recommended operating range will void warranty. TOTAL HEAD RATED CAPACITY Model DC FC EC

Red Jacket Water Products “FC” SERIES PUMPS - 150 LPM FOR 4“ DIAMETER WELLS 0 FEET METERS • 100 mm (4”) BIG-FLO pump ends have a 50 mm (2”) BSP threaded discharge outlet. RECOMMENDED OPERATING RANGE TOTAL HEAD • Maximum pump diameter is 96 mm (3¾”). • Minimum well size is 100 mm (4”). • Continuous operation outside recommended operating range will void warranty. • Pumps supplied with 50 mm (2”) bronze check valve at an additional price. DC/FC PUMPS - 90 – 150 LPM Upthrust Washer Impeller Diffuser Deflector Spline Sleeve Rubber Bearing Diffuser Sleeve Spline Sleeve Rubber Bearing Upthrust Washer...

“EC” SERIES PUMPS - 250 LPM FOR 4“ DIAMETER WELLS 40 • 100 mm (4”) BIG-FLO pump ends have a 50 mm (2”) BSP threaded discharge outlet. • Pumps supplied with 50 mm (2”) bronze check valve at an additional price. RECOMMENDED OPERATING RANGE • Maximum pump diameter is 96 mm (3¾”). • Minimum well size is 100 mm (4”). • Continuous operation outside recommended operating range will void warranty. Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.redjacketwaterproducts.com Red Jacket Water Products and Big-Flo are trademarks of Xylem...