Catalogs >
RED JACKET >
BRJ2EP R2 2EP Submersible Effluent Pump Wastewater

BRJ2EP R2 2EP Submersible Effluent Pump Wastewater
4Pages

Catalog excerpts

BRJ2EP R2 2EP Submersible Effluent Pump Wastewater - 1

FEATURES • Impeller: Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. • Casing: Cast iron volute type for maximum efficiency. 2" NPT discharge. • Mechanical Seal: Silicon carbide vs. silicon carbide sealing faces. Stainless steel metal parts, BUNA-N elastomers. • Shaft: Corrosion-resistant, stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation. • Power Cord: Standard cord is 20' long. • Fasteners: 300 series stainless steel. • Operation: Capable of running dry without damage to components. • Capacities: up to 140 GPM. • Total heads: up to 128 feet TDH. • Temperature: 104ºF (40ºC) continuous; 140ºF (60ºC) intermittent. • Options available on this Series are: Silicon bronze (unleaded) impellers, tungsten carbide shaft seals and longer power cords in 30', 50' and 100' lengths. Option prices and order suffixes are found in the Price Book. SUBMERSIBLE EFFLUENT PUMP WASTEWATER

Open the catalog to page 1

BRJ2EP R2 2EP Submersible Effluent Pump Wastewater - 2

Red Jacket Water Products Wastewater PERFORMANCE CURVES METERS FEET 40 METERS FEET TOTAL DYNAMIC HEAD TOTAL DYNAMIC HEAD Oil-Filled: Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer. Class B insulation. Single phase: Built-in overload with automatic reset. All single phase models feature capacitor start motors for maximum starting torque. 1 ⁄3-1 HP – 16/3 SJTOW with 115V or 230V molded NEMA three prong grounding plug. 11⁄2 and 2 HP – 14/3 STOW with bare leads. Three phase: Overload protection must be provided in starter unit. 1 ⁄2-2 HP – 14/4 STOW with...

Open the catalog to page 2

BRJ2EP R2 2EP Submersible Effluent Pump Wastewater - 3

Red Jacket Water Products Wastewater Specifically designed for the following uses: Homes, farms, trailer courts, motels, schools, hospitals, industry, effluent systems.

Open the catalog to page 3

BRJ2EP R2 2EP Submersible Effluent Pump Wastewater - 4

DIMENSIONS (All dimensions are in inches. Do not use for construction purposes.) COMPONENTS Description Item No. 1 Impeller 2 Casing 3 Silicon carbide vs. silicon carbide mechanical seal 4 Shaft 5 Motor 6 All ball bearing heavy duty design 7 Power cable 8 O-ring Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.xyleminc.com/brands/redjacketwaterproducts Red Jacket Water Products are trademarks of Xylem Inc. or one of its subsidiaries. © 2012 Xylem Inc. BRJ2EP R2 September 2007

Open the catalog to page 4